BP Mods - Labs MTL RTA Atomizer

58.90 CHF

Tax included

BP Mods presents the Labs MTL RTA atomizer !

This is the Labs MTL RTA, a rebuildable atomizer with a capacity of 2.7ml, all stainless steel.

This 22mm diameter atomizer is designed for indirect inhalation (MTL).

The airflow offers a wide choice of draw, thanks to an ingenious system.

Indeed by changing the pin you can change the airflow, six pins are provided with the kit.

In addition to the pins, four bells are supplied, thanks to them, you will be able to adapt your atomizer to your E-liquids in order to obtain the best flavours.

The Labs MTL is a rebuildable single coil atomizer.

Many different coils and types of resistive wires can be mounted on the two poles next to each other.

What more could you ask for than a modular atomizer with a high end look ?

Color

Stainless Steel

Quantity

Secure HTTPS TRANSACTIONS

FREE SHIPPING from CHF 50.

Description
Product Details

Labs MTL RTA Atomizer

With a simple stainless steel construction and a semi-transparent PCTG tank on the top, this rebuildable atomizer has it all !

At 22mm in diameter and 38.6mm high (without the 510 drip tip), the Labs MTL is filled from the top by simply turning the top cap a quarter turn.

The Labs MTL RTA has a single coil deck, this atomizer has a capacity of 2.7ml and is intended for use in indirect inhalation (MTL).

4 flavouring bells

Supplied with the BP Mods Labs atomiser are four flavouring bells, allowing you to adapt to different types of E-liquid to get the best flavours.

One bell is pre-installed plus three others are available.

With your Labs MTL, you will find one bell that is designed for dry classic e-liquids, a second bell for sweet e-liquids, a third for fruity gourmet e-liquids and a fourth for complex blend and spicy e-liquids.

Assembly and disassembly of the bells:

The Labs MTL RTA atomizer already has a bell pre-installed, to remove it you will simply need to insert the tool that is provided into the drip tip slot (top of the atomizer) and push it out.

To install a new bell, simply insert the bell into the part that sits on the tray.

6 airflow inserts

The airflow offers a wide choice of draws, thanks to an ingenious system.

So that you can adjust the airflow to your preference, six airflow inserts are supplied with the Labs MTL RTA.

You can choose between six inserts, one pre-installed and five others at your disposal:

0.8mm, 0.8mm (2 holes), 1mm, 1.1mm, 1.2mm and 1.5mm

Mounting the insert:

Nothing could be easier, just use the tool supplied with the atomizer (the same as for mounting the bells) and simply unscrew the pre-installed insert and screw the new one into place in the centre of the tray.