Sold individually This is the replacement Pyrex for the Flint from Geek Vape ! Pyrex "straight" it offers a capacity of 2 ml.

SOLD INDIVIDUALLY Here is the replacement Pyrex for the clearomizer Cerberus from Geek Vape ! Pyrex "bubble" it offers a capacity of 5.5 ml.   

Geek Vape offers you its Z Series Resistors ! These resistors are designed for use with the Zeus Sub Ohm Clearomizer and the Z Fli Clearomizer. The Z Series resistors are made of Mesh and have a large heating surface which intensifies the flavours and develops a large quantity of vapour. These resistors are available in 6 versions: Z Series Resistors: 0.15 Ohm, for use between 80 and 90 Watts Z Series Resistors: 0.20 Ohm, for use between 70 and 80 Watts Z Series Resistors: 0.25 Ohm (dual coils) for use between 45 and 57 Watts Z Series Resistors: 0.40 Ohm, for use between 50 and 60 Watts Z Series XM Resistors: 0.15 Ohm for use between 70 and 85 Watts Z Series XM Resistors: 0.4 Ohm for use between 50 and 60 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 5 UNITS Geek Vape offers these Supermesh resistors for the clearomizer Cerberus ! The Supermesh resistors are made of cotton and use Mesh technology, which increases their life span and the rendering of flavours. Supermesh resistors are available in two versions: X1 in 0.2 Ohm to be used between 60 and 70 Watts. X2 in 0.4 Ohm to be used between 50 and 60 Watts.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 5 UNITS Geek Vape offers you the NS Flint Resistors ! The NS Resistors are designed for the Flint Kit from Geek Vape. They are intended for MTL (indirect) inhalation and are made of NI80 and pure organic cotton. Available in two values: In 1.6 Ohm between 6,4 and 9 Watts     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

This is the Pyrex replacement for the Zeus SubOhm, Zeus X and Zeus Dual clearomizers and atomizers from Geek Vape ! Pyrex "bubble" it offers a capacity of 5.5 ml.     

IN PACKS OF 5 UNITS Here are the P Series resistors from Geek Vape ! P Series resistors are compatible with the Aegis Eteno E100I pod, the Aegis Eteno E100 pod and the Eteno E100 Cartridge. These resistors are also compatible with: Aegis Boost Pro Pod, Aegis Boost Pro 21700 Pod, Aegis Boost Pro Cartridge, Z100C DNA Pod, Z100C Cartridge, Cartridges and Aegis Boost Pro 2 (B100) Pod. The P Series Resistors are ideal for a DL (direct) draw, they are made of Kanthal A1 mesh, have excellent flavour rendition and produce a large volume of vapour. These resistors are available in three versions: 0.15 Ohm XM, 0.2 Ohm and 0.5 Ohm.       Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     0,5 OHM CURRENTLY BEING RESTOCKED

Here is the Mini Tool Kit V2 from Geek Vape ! The Mini Tool Kit V2 contains all the necessary tools to make coils and assemblies for the rebuildable. Making your own coils is easy with the Mini Tool Kit V2 ! Simply use the appropriate cylinders and pins for the desired diameter, insert the wire and turn ! Rebuilders will be delighted !    

Geek Vape offers you its Micro Mesh + Cotton for the Zeus X Mesh RTA ! Here is everything you need to use your Zeus X Mesh RTA.  Included in the pack are two replacement Micro Mesh sheets and cotton ! Thanks to its larger heating surface, the Mesh has an incomparable flavour reproduction in addition to having an unprecedented responsiveness. Nothing could be easier to assemble if you are eager to get into the world of rebuildable, it's up to you ! Pack of 2 Mesh with 2 cotton pads, available in Kanthal or Nichrome.    Compatible with the Dead Rabbit M RTA    

IN PACKS OF 5 UNITS Here are the G Series resistors from Geek Vape ! The G Series resistors work with the Siren G MTL clearomizer. These resistors are available in: Mesh of 1.2 Ohm, to use between 9.5 and 11.5 Watts compatible with high levels of nicotine, nicotine salts and CBD.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

Geek Vape presents the Zeus Sub Ohm Clearomizer ! Equipped with a tank of 5ml with Pyrex bubble (or 3.5ml with Pyrex straight) and with its diameter of 25mm, it reproduces incredibly well the flavors and guarantees a powerful vape in direct inhalation. The Zeus Sub Ohm fills from the top and is equipped with an adjustable airflow also located at the top. The Zeus Sub Ohm Clearomizer is compatible with Z Series Resistors.   

Geek Vape presents the Z Fli Clearomizer ! Geekvape's venerable Zeus clearomizer is back in a big way with an improved version, the Z Fli. Zeus aficionados will be delighted to rediscover its design, its top airflow to prevent leaks, and its famous, imposing 810 drip tip. Equipped with a 5.5 ml Pyrex tank, the Z Fli ensures prolonged vape sessions. With a diameter of 26 mm at the base, it will blend harmoniously with your vape box and give you a powerful, flavoursome vape. A graduated airflow ring offers precise adjustment, while the new Flip opening system simplifies filling. The Z Fli clearomizer uses the renowned Z Series Resistors, in particular the XM versions (0.15 Ohm and 0.4 Ohm), for longer life and optimum flavour reproduction.      Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

Here is the Aegis Boost RBA 2ml cartridge Geek Vape ! Turn the Aegis Boost kit into a rebuildable with the Aegis Boost RBA Cartridge.The Aegis Boost RBA cartridge is equipped with a single coil plate and has a capacity of 2ml.The kit includes 4 coils: 2 in KA1 of 1.3 Ohm2 in N8 Fused Clapton of 0.6 Ohm2 cotton laces

Geek Vape offers the Aegis Boost Cartridge for the Aegis Boost Kit. The original cartridge of your Kit Aegis Boost is worn, or you want to vaper several flavors during the day ? Here is the solution: the Aegis Boost Cartridge + 2 resistors ! Similar to the original, this cartridge has a capacity of 3,7ml.Aegis Boost Cartridge is delivered with the two resistors:- 1 of 0.4 Ohm (pre-installed), to use between 25 and 33 watts. - 1 of 0.6 Ohm, to use between 15 and 25 watts.   

SOLD WITHOUT BATTERY Here is the Box Aegis Solo 2 S100 from Geek Vape ! The Box Aegis Solo 2 S100 is even more robust and resistant to water and dust than its predecessors. The Aegis Solo 2 has a larger screen but is even more compact than its bigger sisters. This box can accommodate atomizers up to 24 mm in diameter. This box works with a 18650 battery (not included) and can deliver a power of 100 Watts. The Aegis Solo 2 is equipped with a switch that allows to lock the box and of course all the protections and security systems in force.   

SOLD WITHOUT BATTERY Geek Vape presents its Box Aegis Legend 2 ! The Aegis Legend 2 box is powered by 2 18650 batteries (not included) and can reach a power of 200 Watts. This box resists to everything or almost, indeed its body is mainly made of aluminum and silicone, which gives it strength and flexibility at the same time. The Box Aegis Legend 2 will resist in case of possible falls and it will not fear water, moreover it is certified IP68 ! This box can accommodate atomizers up to 25 mm in diameter. With its large screen, it will be easy for you to make all your favorite settings such as Watts mode etc. The Box Aegis Legend 2 will make the happiness of many vapers that is a certainty !    

IN PACK OF 5 UNITS Here are the B Series resistors from Geek Vape ! B Series Resistors work with the Aegis Boost Pod Kit, Z Nano 2 clearomizer, Aegis Boost Plus Pod etc. These resistors come in four models. In 0.2 Ohm Mesh, use between 50 and 58 Watts for direct inhalation. In 0.3 Ohm Mesh, use between 30 and 38 Watts for direct inhalation. In 0.4 Ohm Mesh, use between 25 and 33 Watts for direct inhalation. In 0.6 Ohm Mesh, to be used between 15 and 25 Watts for a tighter draw.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 2 UNITS Geek Vape offers you the Aegis Eteno E100 Cartridges ! The Eteno cartridges are designed for the Aegis Eteno E100I pod and the Aegis Eteno E100 pod. With the many colours offered, you can customize your Aegis Eteno as you wish and on top of that, these cartridges are compatible with the 810 drip tip.  The Aegis Eteno magnetic cartridges have a capacity of 4.5 ml, they are equipped with an adjustable airflow and filling is done from the top by simply unscrewing the top cap. With these cartridges you can quickly change flavours or you can easily change a damaged cartridge. These cartridges are compatible with P Series Resistors.    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   

SOLD INDIVIDUALLY Introducing the 510 Aegis Eteno E100 Adapter from Geek Vape ! With this 510 adapter you can install on any e-cigarette the Eteno E100 Cartridge that originally equips the Aegis Eteno E100I pod and the Aegis Eteno E100 pod. This adapter is available in several colours, as is the Eteno E100 cartridge, so you can personalise your e-cigarette as you wish. The Eteno E100 cartridges are compatible with the P Series Resistors, thanks to them you will have an excellent rendering of flavours and a dense volume of steam.