Sold individually Innokin offers you its Pyrex tube Zlide D24 intended to go on the clearomizer Zlide 24. This replacement tube offers a capacity of 4 ml. Made of Pyrex, this replacement tube will last for years and will be able to accommodate all your e-liquids.

IN PACKS OF 5 UNITS Here are the T20 Prism Resistors from Innokin ! T20 resistors are compatible with the Prism T20 clearomizer. Resistance of 1.5 Ohm in Japanese organic cotton.    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 5 UNITS Here are the Zenith & Zlide resistors from Innokin ! Zenith & Zlide Z Coil Resistors have a long life and excellent flavour reproduction. Ideal for RDL (restrictive direct) or MTL (indirect) draw.    Several values are available: Zenith & Zlide Resistors 0.3 Ohm mesh Zenith & Zlide Resistors 0.5 Ohm Kanthal A1 Zenith & Zlide Resistors 0.6 Ohm Mesh Duo Prime Zenith & Zlide Resistors in 0.8 Ohm Kanthal A1 Zenith & Zlide Resistors in 1.0 Ohm Zenith & Zlide Resistors in 1.6 Ohm Kanthal A1      Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

PACK OF 5 UNITS Introducing the Prism T18 Resistors from Innokin ! These resistors are compatible with the Prism T18 and T22 clearomizers from Innokin. These resistors of 1.5 Ohm are equipped with a double coil to boost the production of steam and the rendering of flavors. The twenty holes of the resistor promotes the absorption of liquid.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   

IN PACKS OF 5 UNITS Here are the Prism S resistors from the manufacturer Innokin ! The Prism T20 S resistors are compatible with the Endura T20 S.Available in two versions: In 0,8 Ohm between 16 and 18 Watts In 1.5 Ohm between 13 and 14 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

SOLD INDIVIDUALLY Innokin offers you its Pyrex Zlide Top ! This Pyrex bubble is compatible with the Clearomizer Zlide Top. This replacement tank has a capacity of 4.5 ml. Made of Pyrex, this replacement tube will last for years and will be able to accommodate all your e-liquids.       

Innokin offers its replacement Pyrex 2ml for the atomizer Zlide D22. No more worries in case of breakage or if you just want to have a spare Pyrex.

SOLD INDIVIDUALLY Innokin offers you its Zenith Minimal Pyrex ! This straight Pyrex is compatible with the EZ Tube Kit and the Zenith Minimal Clearomizer. This replacement tank has a capacity of 4 ml. Made from Pyrex, this replacement tube will stand the test of time and be able to accommodate all your e-liquids.       

Sold individually Innokin offers you its Pyrex Zenith 2 designed to go on the Zenith 2 clearomizer. This replacement Pyrex has a capacity of 5.5 ml. Available in clear or black. No more fear in case of breakage !    

Innokin presents the Klypse Pod ! The Klypse Pod stands out for its simplicity of use, indeed no adjustment is to be made, just vacuum and it's done ! This pod is powered by an integrated 700mAh battery and thanks to its USB-C port the Klypse will be recharged in less than an hour. The Klypse pod is equipped with a 2ml disposable cartridge with a built-in 0.8 Ohm mesh resistor. On top of that, a magnetic cap will protect your pod from shocks and dust, what more could you ask for ? Icing on the cake, once removed this cap is also magnetized on the bottom of the pod Klypse, a good idea not to lose it.  The top for a vape in MTL or RDL, the Klypse is also ideal for nicotine salts. Compatible with Innokin Klypse cartridges.    Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     

Innokin presents the EZ Tube Kit ! The EZ Tube Kit is a harmonious combination of a tubular battery and the brand new Zenith Minimal Clearomizer. This kit features an integrated 2100mAh battery, guaranteeing extended autonomy for users. The EZ Tube chipset is capable of delivering up to 40 Watts of power. The innovative design incorporates a screen under the tube, enabling vapers to easily monitor the remaining autonomy, the current Resistor and the power setting. The Zenith Minimal clearomizer, which accompanies the mod, is compatible with all Zenith & Zlide Resistors, offering great flexibility in terms of vape styles, from the restrictive MTL (Mouth To Lung) to the more aerated DTL (Direct To Lung). The Pyrex tank holds up to 4 ml of e-liquid, with a top-fill system designed to simplify the addition of liquid. The Zenith Minimal's adjustable airflow allows you to adapt to the preferences of each user.       Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.         

SOLD WITHOUT BATTERY Innokin presents the CoolFire Z80 Kit ! The CoolFire Z80 Kit consists of the CoolFire Z80 box and the Zenith 2 clearomizer. The CoolFire Z80 box is powered by an 18650 battery (not included) and delivers a maximum power of 80 Watts. The Zenith 2 clearomizer has a capacity of 5.5ml, a diameter of 26mm, has an adjustable airflow and is filled from the top. The CoolFire Z80 Kit has some amazing features, such as the FØ mode, which boosts flavours and extends the life of your resistors by sending an alternating current in the form of waves during each puff. You can adjust the frequency of these waves but the manufacturer recommends for MTL (tight) draw: 51 to 100 Hz and for RDL or DL (direct) draw: 20 to 50 Hz. The Refresh mode, sends 40% of the power you set to the AC current to allow the resistor to soak in and boost the flavours. The Cut off mode allows you to choose the maximum duration of your puffs between 3 and 18 seconds. Compatible with Innokin Zenith & Zlide Resistors.    

Innokin presents the CoolFire Z60 Kit ! The CoolFire Z60 Kit consists of the CoolFire Z60 box and the Zlide Top clearomizer. This kit works with an internal battery of 2500 mAh and delivers a maximum power of 60 Watts. The Zlide Top clearomizer is 24.5mm in diameter, has a super accurate adjustable airflow and is filled from the top. You can enjoy a capacity of 3ml with the straight Pyrex and 4.5ml with the Pyrex bubble (supplied with the kit). The Zenith & Zlide Resistors are compatible with the Zlide Top clearomizer, this clearomizer is designed for MTL (tight draw) or RDL (restrictive direct draw). The Coolfire Z60 Kit is easy to use and reliable, whether you're a beginner or an experienced vaper, you'll be amazed by its versatility.       Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.         

ONLY COMPATIBLE WITH THE ZLIDE CLEAROMIZER Innokin offers you its Drip Tip 510 Resin for the Zlide clearomizer ! This drip tip is equipped with an ergo that locks the opening of the top-cap. Designed to secure the top-cap of the Zlide clearomizer, this resin drip tip 510 is therefore only compatible with the latter. SOLD INDIVIDUALLY       

Innokin presents its Zlide Top clearomizer ! The Zlide Top clearomizer is an improved version of the Zlide, it is now 24.5mm in diameter and has a top airflow. The Zlide Top can hold 3ml of e-liquid with the straight Pyrex and up to 4.5ml with the Pyrex bubble (delivered with the clearomizer). The filling is done from the top and new, to avoid leaks, its adjustable airflow is also located on the top. Thanks to the use of Z Coil - Zenith & Zlide Resistors, the Zlide Top can boast of being one of the best clearomizers. The Zlide top clearomizer is designed for MTL (tight) or RDL (semi aerial) draw, it stands out in particular thanks to its excellent flavour rendering.       Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     

Innokin presents the Zlide D24, a step further in the world of MTL ! The clearomizer Zlide D24 is an enlarged version of the Zlide D22 from 22 mm to 24 mm in diameter and can now accommodate 4 ml of e-liquid. The Zlide D24 retains all the assets that have made are success, the filling is still done from above and its adjustable airflow is located at the bottom. Thanks to the use of Zenith resistors, the Zlide D24 can be included in the list of the best clearomizers. The zenith resistors stand out for their long life and exceptional flavor rendition.   

Here is the Zlide D22 from Innokin,the descendant of the famous Zenith ! Little brother of the Zlide D24, the Zlide D22 has a diameter of 22 mm, it has a tank capacity of 2 ml and a filling system from above. Innokin has evolved the filling system, before sliding the lid, remember to remove the Drip-Tip and close the air intake located at the bottom. With this clearomizer you will have the choice between all Zenith resistors, what to satisfy the greatest number ! The Zlide D22 of Innokin is very strong in its performance and innovations !   

This is the Zenith 2 Clearomizer from Innokin ! The Zenith 2 clearomizer has a diameter of 26 mm and has a tank capacity of 5.5 ml. The Zenith 2 is filled from the top by turning the top cap. This clearomizer has an adjustable airflow, so it will be very easy to choose your favorite draw. The Zenith 2 Clearomizer is designed for DL (direct) or MTL (indirect) inhalation. Two drip tips are supplied with the clearomizer, one for MTL and one for DL vaping. The Zenith 2 Clearomizer is compatible with Innokin Zenith & Zlide Resistors.    Remember to change your resistor regularly. This will depend on how often you use it, but about every fortnight you should change it or when you smell something burning.   

Innokin presents the Clearomizer GoZ MTL ! The GoZ MTL is the original clearomizer of the GoZ Kit. The GoZ MTL Clearomizer has a capacity of 2 ml and a diameter of 20 mm. The GoZ MTL is filled from the top and this clearomizer is compatible with all Zenith resistances of Innokin. Thanks to its adjustable airflow you can easily switch from a MTL draw (tight) to a RDL draw (restrictive direct). The GoZ MTL Clearomizer perfectly reproduces all the flavors of your favorite e-liquids.   

PACK OF THREE UNITS Innokin presents the Klypse Cartridges ! The Klypse Cartridges are designed for the Klypse Pod. These 2 ml cartridges are equipped with an integrated mesh resistor of 0,8 Ohm. Filling is done from the side by removing the small cap. The Klypse cartridges have a tight draw and render the flavours impeccably. There are no resistors to change, you will have to change the whole cartridge, but the ability to vary flavours throughout the day will be easy with this three pack of cartridges !    Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   

PACK OF 3 UNITS Here are the 1.4 Ohm cartridges for the Kit IO Pod from Innokin ! For a tight vape (MTL) and compatible with high rates and salts of nicotine. Capacity of 0.8 ml with an integrated resistor of 1.4 Ohm. Available in two versions: 1.4 Ohm in kanthal 1.4 Ohm ceramic     Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.