Brands
.png "Back to the home page")
High End
High End means high end, in this category you will find unique gear made by modders from all over the world. High End equipment is usually made in small batches, handmade and often by craftsmen who are themselves passionate about vape. High End equipment is intended for vapers who vapourize in rebuildable, it is of course possible to combine a box High End with a traditional clearomizer but it would be a terrible mistake of taste! In the High End equipment you will find electronic boxes, mechanical boxes with squonk, atomizers, drippers etc.. Before switching to High End equipment with mechanical mods you must first have the necessary knowledge of electricity and particularly with the law of Ohm.
Sort by:
-
160.00 CHFDiscover the Moka RTA Atomizer, the latest creation from Italian modders Ennequadro Mods. Made from 316L stainless steel, this high-end rebuildable atomizer combines performance and aesthetics. The Moka RTA atomizer is designed for an MTL draw, has a capacity of 4.4ml and fills from the bottom. With its 22mm diameter, the Moka RTA is designed for single-coil assembly. This Atomizer has an airflow located on the bottom and you can choose from 3 different bells and 8 different Air Pin to adjust the airflow to perfection. The Moka RTA atomizer is handcrafted in Italy from top-quality materials to guarantee durability and reliability. Its impeccable finish will delight the most demanding vapers. Don't miss the chance to enjoy an unrivalled vape experience with the Moka RTA Atomizer from Ennequadro Mods. The Moka RTA is recommended for advanced MTL vapers.
-
149.00 CHFIntroducing the Kayfun X RTA Atomizer from German manufacturer SvoëMesto ! 10 years of experience have allowed SvoeMesto to create a perfect MTL atomizer: the Kayfun X ! The Kayfun X is 22mm in diameter, has a capacity of 3ml and has a filling system located on top. This single coil atomizer is for the vaper who wants an MTL vape with powerful flavours. The base of the Kayfun X has been completely redesigned and equipped with a new Airflow Control: the Aerokon. The Aerokon Airflow Control is the first system that does not restrict the airflow at the duct entrance, but only directly below the coil, which creates an acceleration of the airflow and therefore the airflow is delivered much more evenly over the coil. More information can be found in the description.
-
169.00 CHFThe Vaping Gentlemen Club presents the Millennium RTA Atomizer ! This is the Millennium RTA, this 22mm diameter atomizer is intended for indirect draw (MTL). The Millennium RTA is designed for a single coil setup, has a capacity of 4ml and is filled from the top. This atomizer is equipped with a liquid control and airflow control, in fact, you will have the opportunity to change the bells and airflow pins to adapt your atomizer to your E-liquids to get all the flavors. The Millennium RTA is a high-end MTL atomizer, made of stainless steel, with it you will have an exceptional rendering of flavors and great reliability. BATCH 11
-
98.00 CHFArcana Mods presents the Arcana 22 RTA Atomizer ! The Arcana 22 RTA is the latest rebuildable atomizer manufactured by Arcana Mods and Pipeline Store. With its 22mm diameter and 3.5ml tank, the Arcana 22 is suitable for an MTL draw. The Arcana 22 RTA is designed for MTL (mouth-to-lung), but can be converted to RDL or DL. (parts not supplied with the Arcana 22 RTA) The airflow can be fine-tuned with four perforated screws that are screwed in from below, via the positive pole This atomizer is designed for the installation of a single coil, the manufacturer recommends to install a coil with a diameter of 2.5mm. To fill, turn the top cap anti-clockwise, this will close the liquid inlet and open the top cap. Remove the top cap and fill the tank with e-liquid, now turn the top cap clockwise, this will close the atomizer and open the e-liquid inlet. The atomizer is made of 316L stainless steel and has no visible O-rings on the outside. The Arcana 22 RTA atomizer is recommended for advanced vapers.
-
9.90 CHFThis is the Service Set for the Taifun GT V Atomizer from Taifun ! Everything you need if you lose a seal, a screw, or simply want to change a part. Contents of the pack: 2 NBR balls 2 NBR70 O-rings 14 mm x 1 mm 2 O-rings NBR50 17 mm x 1.5 mm 2 O-rings NBR50 22 mm x 1 mm 2 O-rings NBR50 19 mm x 1 mm 2 O-rings VMQ50 18 mm x 1 mm 2 O-rings NBR50 5 mm x 1 mm 1 O-ring 17 x 1.5 mm VMQ70 (red) for replacement on base 1 O-ring 17 x 1.5 mm NBR70 (black) for replacement on base 1 Screw insulator positive pole 2 PEEK positive pole insulators 4 Hexagon screws M2.5 x 4 mm 1 Hexagon screw M3 x 10 mm 6 Countersunk screws M1.6 x 3 mm
-
16.90 CHFSOLD INDIVIDUALLY Introducing the Pyrex Taifun GT V from Taifun ! The Pyrex Taifun GT V is a replacement Pyrex for the Taifun GT V (GT 5) atomizer. Made of borosilicate glass, it has a capacity of 6ml.
-
199.90 CHFCURRENTLY BEING RESTOCKED The long awaited GT V Atomizer from Taifun is finally here ! This is the Taifun (GT 5), once again, the German manufacturer Taifun has improved its atomizer, to the delight of all vapers who love high-end equipment. The Taifun GT V is 25mm in diameter, has a capacity of 6ml and has a filling system located on the side. This single coil atomiser is aimed at the vaper who wants a RDL (restrictive direct draw) vape with powerful flavours. Discover the improvements and differences compared to the Taifun GT IV: Simply press the Top-Cap to automatically lock the Liquidcontrol. The liquid inlets of the Taifun GT V have been further enlarged, The Taifun GT V is completely threadless, except for the 510 connection of course. This atomizer combines the well-known use of Air Disks with a precisely adjustable outer AFC ring. The GT V is designed exclusively for use in DL/RDL draw (direct draw and restrictive direct draw). Even though the adaptable Air Disks and the airflow adjustment possibilities theoretically give you the possibility to use it with high wattage coils, the manufacturer expressly recommends not to buy this atomizer for this purpose. Also the internal design of the atomizer bell would not allow sufficient vapor saturation for MTL use.
-
129.00 CHFCURRENTLY BEING RESTOCKED Imist introduces the Simurg SX V2 RTA Atomizer ! Discover the Simurg SX V2 RTA Atomizer which is a short version of the Simurg V2 RTA. The tray of this atomizer is designed for mesh mounting. This 25mm diameter atomizer has a capacity of 6.5ml and is filled from the side. The Simurg SX V2 is designed for a restrictive direct draw (RDL). The Simurg SX V2 RTA is a high end atomizer with a perfect finish, the metal parts are made of stainless steel 1.4401 (V4A) and the tank is made of borosilicate glass.
-
189.00 CHF 149.00 CHFSOLD WITHOUT BATTERY L'Atelier presents you its Box Bottom Feeder Holy Chapter 2 ! The Holy Chapter 2 is a mechanical bottom feeder box that works with an 18650 battery (not included). The Holy Chapter V2 is a BF box made of anodized aluminium. Drippers or atomisers with a maximum diameter of 25 mm can be mounted on this box. This box has a squonk bottle with a capacity of 8 ml. On the front of the box is a switch cut into the body of the box. A silver blade ensures a perfect contact between the BF connector and the battery. All connectors are silver plated and fully insulated. Made in Switzerland ATTENTION THE HOLY CHAPTER 2 IS A 100% MECHANICAL BOTTOM FEEDER BOX, SO IT IS NECESSARY TO KNOW THE OHM LAW AND TO BE EXPERIENCED.
-
79.29 CHFSOLD WITHOUT BATTERY AND WITHOUT ATOMIZER The History Mod manufacturer offers you the Tubes Killer Gun ! The Killer Gun Tubes are mechanical mods that work with a battery (not supplied). The switch is integrated into the tube receiving the battery. The Killer Gun is a mechanical mod made in Italy. It is entirely made of brass with a different finish depending on the model. The top cap is compatible with the Goon 24 (sold separately) 3 models are available: Baby Killer Gun accu 18350 (available in: Silver, Satin Glossy, Gold and Hammered) Killer Gun accu 18650 (available in: Silver, Satin Black and Hammered) Stacked Killer Gun: extension tube for dual 18650 batteries as standard (available in: Black and Silver, Black and Gold) ATTENTION The Tube Killer Gun is a 100% mechanical and hybrid mod, it is not to be used in all hands, for a safe use it is imperative to know Ohm's law and to be experienced.
-
275.00 CHFSOLD WITHOUT BATTERY Dicodes presents its Dani Micro box ! The Dani Micro is an electronic box with a power that can go up to 80 Watts with an 18650 battery (not included). This high-end box is more compact than its predecessors but works with the same famous Dicodes chipset that offers 4 vape modes as well as all the safety features required for a safe vape. At 75.5mm in height and 36.7mm in length, the Dani micro is compact and lightweight but can still accommodate atomisers up to 23mm in diameter. The spring-loaded 510 pin of this box will offer you a remarkable conductivity and its protection against polarity reversal will guarantee you absolute safety. The Dani Box Micro can be charged via the USB-C port, but we advise you to use an external battery charger. We advise you to charge your batteries with an external charger, this will guarantee a longer life for your batteries.
-
9.90 CHFPACK OF 3 UNITS Arcana Mods offers the RDL Kit for the RTA Chariot Atomizer. The RDL Kit for the RTA Chariot Atomizer is designed by Arcana Mods and Pipeline. This kit is used to upgrade the RTA Chariot from an MTL draw to an RDL draw. The RDL kit consists of 3 screws with different diameters of holes: 1 screw with a 1.6 mm perforation 1 screw with a 1.8 mm perforation 1 screw with a 2 mm perforation
-
85.00 CHFArcana Mods presents the Chariot RTA Atomizer ! The Chariot RTA is an atomizer designed by Arcana Mods and perfected by the German company Pipeline. The Chariot is suitable for indirect inhalation (MTL), for restrictive direct inhalation (RDL) you will need to use the RDL Chariot Kit (available on our website by clicking HERE). This single coil atomizer has a diameter of 22mm and a capacity of 4ml. With its small combustion chamber this atomizer gives a dense and warm vapor. To adjust the airflow: the basic airflow is chosen through one of four perforated screws of different diameter. For fine adjustment, the airflow ring can be set to six different positions. Filling is done from the top by unscrewing the top cap. The RTA Cart is recommended for advanced MTL vapers.
-
2.00 CHFPACK OF 4 UNITS The Vaping Gentlemen Club offers you the Mesh 325 / 316L for the Ripley RDTA Atomizer. The Mesh 325 / 316L for the Ripley RDTA Atomizer are designed by The Vaping Gentlemen Club and manufactured by Ambition Mods. These Mesh 325 / 316L are an alternative to the original Xylemas microtubes, just roll them up and insert them in place of the Xylemas microtubes. The Mesh 325 / 316L will guarantee you a superior flow of e-liquid. CONTENTS OF THE PACK: 2 x Ripley MTL / RDL RDTA 316L Mesh 325 - 52.5mm x 21.5mm 2 x Ripley MTL / RDL RDTA 316L Mesh 325 - 34.5mm x 21.5mm
-
4.00 CHFPACK OF 2 UNITS The Vaping Gentlemen Club offers you the Air Pins for the Ripley RDTA Atomizer. The Air Pins for the Ripley RDTA Atomizer are designed by The Vaping Gentlemen Club and manufactured by Ambition Mods. These Air Pins are 2mm in diameter and are designed for indirect inhalation and tight draw.
-
53.50 CHFThe Vaping Gentlemen Club presents the Ripley MTL Atomizer ! The Ripley MTL is an atomizer designed by The Vaping Gentlemen Club and manufactured by Ambition Mods. The Ripley is intended for indirect inhalation and a tight draw. This top coil atomizer has a diameter of 22mm and a capacity of 3.2ml. The Ripley MTL is very suitable for tobacco flavoured e-liquids and creamy flavours. The airflow can be adjusted with interchangeable pins supplied with the atomiser, the air is directed directly onto the coil. The e-liquid is fed to the coil with the new Xylema stainless steel pins.
-
48.50 CHFCURRENTLY BEING RESTOCKED Introducing the Kumo RDTA Atomizer from Aspire X in collaboration with Steampipes. A new collaboration from Aspire, this time with high-end manufacturer Steampipes. The Kumo RDTA is a 24mm diameter atomiser with a capacity of 3.5ml. The Kumo RDTA has a tray that can accommodate a single coil. Two airflow rings are provided to change the look and airflow. The filling is done from the side.
-
145.00 CHFSOLD WITHOUT BATTERY Here is the latest from Ennequadro Modsthe Mod Imo2 650! The Mod Imo2 650 is the smallest 18650 tube currently available on the market. This mechanical tube has a diameter of 22mm and measures 70mm high. Discover the improvements of this version 2.0: A new button shape that provides a larger contact area and prevents accidental activations.To prevent the tube from overheating, heat sinks have been placed around the 510 connector to reduce the heat generated by the atomizer. CAUTION this equipment is intended for the experienced vapoteur with knowledge of electricity and the application of Ohm's law. This is a mechanical mod, so it has no protection
-
97.00 CHFSOLD WITHOUT BATTERY Dovpo and Signature Mods have done it again! Here is the box Clutch Dual X18 ! This mechanical mod works with two 18650 batteries (not supplied) mounted in parallel. The Clutch Dual X18 box is equipped with a lockable reed switch. The side doors are removable to facilitate the placement of your two 18650 batteries and you can install atomizers up to 28mm in diameter. A fuse equips the Clutch Dual X18 for maximum safety in case of short circuit or overvoltage ! WARNING this equipment is intended for the experienced vapoteur with knowledge of electricity and the application of Ohm's law.
-
189.00 CHFCURRENTLY BEING RESTOCKED Here is the Cabeo RTA atomizer from the German manufacturer Steampipes ! The Cabeo RTA is an innovative Top Coiler (coil above the liquid) with a capacity of 5.5ml. The Cabeo RTA is not an improvement of the Corona but a product in its own right. It has an adjustable top airflow, so you will have the opportunity to circulate air on one or both sides of the coil. Topcoil atomizers usually need a steel wire, mesh or cotton to carry the liquid from the tank to the coil. The Cabeo RTA doesn't need any of that, the liquid is brought by capillary action thanks to theuse of physical laws and a revolutionary and sophisticated design. The Cabeo RTA was designed as a pure single coil and is intended for a quiet and tasty vape. (BATCH 02)
-
205.00 CHFSOLD WITHOUT BATTERY Wheelsandtime presents the Carbones Mods with the effigy of Viper Smoke ! Made by Sébastien Lavergne, these mechanical tubes are handmade and designed with the best materials on the market. The Carbones mods are made of brass for both ends and carbon for the body. The switch is super responsive, has a copper adjustment screw and is lockable by simply turning it a quarter turn. The Carbones mods are 24 mm in diameter, run on an 18650 battery (not included) and have a 510 pin that automatically adjusts when the atomizer is screwed on. The reputation of Lavergne tubes has gone around the world, Wheelsandtime is a safe bet when it comes to mechanical mods. You will find two different designs: - Cracked - Skull & Roses Warning: these are mechanical mods, for a safe use it is imperative to know the law of Ohm and be an experienced vaper.
-
159.90 CHFSOLD WITHOUT BATTERY Here is a new version of the Dotleaf kit from DotMod the Dotleaf V1.5 kit ! With its ceramic tank and a heating power of up to 245°, you can vape your favorite herb. The Dotleaf V1.5 Kit has a boost function that automatically kicks in and sends 15° more when you leave the main button pressed DotMod think of everything, for a quick start there are also 4 heat presets at your disposal in the menu. The Dotleaf V1.5 Kit is powered by an 18650 battery (not included) and can be charged either with an external charger or with the USB-C cable included with the kit. The manufacturers have created a versatile kit with the Dotleaf V1.5, in fact, it can be coupled to a water pipe thanks to the 14mm and 18mm adapters supplied with the kit. Never use with e-liquid, the device is only intended for vaporizing dried herbs.
-
59.22 CHFDovpo & BP Mods present you the Pioneer RTA atomizer. This 22 mm diameter atomizer is intended for indirect inhalation. The box has several tanks and drip-tip of different materials and colors. The airflow offers a wide choice of draw, thanks to an ingenious system. Indeed by changing the pin you can change the airflow, three pins are provided with the kit. These pins can be changed without disassembling the sprayer and even without emptying the tank. If you are a person who prefers a DL draw, a kit is available to convert your Pioneer into a DL atomizer. The Pioneer RTA is a rebuildable single coil atomizer. Many coils and types of resistive wires can be mounted on the two poles located next to each other. The Pioneer has a tank that can hold up to 3.7 ml of e-liquid. The Pioneer RTA atomizer is a creation of several passionate modders united under the name BP Mods and manufactured by Dovpo.
-
70.90 CHFReload Vapor the Reload SRDA is a top of the range dripper ! The American manufacturer has created a single coil dripper of 24mm diameter oriented flavors, the assembly is easy thanks to its 4 posts. The Reload SRDA has a very practical adjustable airflow and it is compatible bottom feeder. A dripper of high-end manufacturing with an incredible rendering of flavors !
-
357.00 CHFATTENTION ! SOLD WITHOUT BATTERY, WITHOUT SUPPORT AND WITHOUT ATOMIZER Here is the Gandalf ePipe set from Créavap ! Discover authentic handcrafted ePipes , a high-end range using exceptional and high quality materials.The Gandalf ePipe Set is powered by an 18650 battery (not included) and is equipped with the Ambition chipset, two buttons will allow you to adjust the power of your ePipe from 1 to 60 Watts.The Gandalf 60W comes with the Churchwarden 8" stem, which is a spring loaded switch with wood inclusion.Créavap recommends the use of the clearomizer Zlide D22 from Innokin but the Gandalf ePipe is compatible with all atomizers in 22 mm diameter using a drip-tip 510.
-
198.90 CHFATTENTION ! SOLD WITHOUT BATTERY, WITHOUT SUPPORT AND WITHOUT ATOMIZER Here is the Bent ePipe Set from Créavap ! Discover authentic handcrafted ePipes, a high-end range using exceptional and high quality materials.The ePipe Bent box works as a mechanical mod and provides a ByPass vape, its power depends on the charge of its battery 18350 (not supplied). It is essential to fully understand this mode of operation in order to use this equipment safely. Créavap the ePipe Bent is recommended for use with the Zlide D22 clearomizer from Innokin but the ePipe Bent is compatible with all 22 mm diameter atomizers using a 510 drip-tip. The ePipe Bent is delivered with the stem Saddle 3 mouthpiece.
-
75.90 CHFQP Design arrives from Canada to present you the Gata Atomizer ! The Gata RTA is a 2 in 1 atomizer, indeed, this single coil atomizer of 24mm diameter has two tanks, one 2 ml and another of 4 ml as well as two airflow rings and two drip-tip. The Gata Atomizer has been studied to have the best possible result in both configurations (DL and MTL).
-
144.90 CHFSOLD WITHOUT BATTERY The result of the collaboration between Dovpo and Signature, here is the Box Mono SQ ! The Mono SQ is an electronic box with a power of 75 watts that operates with a single 18650 battery (not included), the latest DNA75C chipset equips this box and it will allow you to configure your vape as you wish. A large 0.96" screen and three buttons underneath will allow you to adjust your box. It also has a USB port that will allow you to update the system and make all the settings you want with the Escribe software.The Mono SQ has an excellent grip thanks to its ergonomic design.
-
250.00 CHFSOLD WITHOUT BATTERY Dicodes presents its Box Dani Mini ! The Dani Mini is an electronic box with a power up to 80 watts with a 18650 battery (not included). This high-end box works with the chipset Dicodes which offers 4 modes of vape as well as all the security required for a safe vape. 77mm high and 41mm wide, the Dani Mini is compact and light but it can still accommodate sprayers up to 24mm in diameter. The pin 510 mounted on spring of this box is made of copper Beryllium, it will offer a remarkable conductivity.
-
169.00 CHFCURRENTLY BEING RESTOCKED Here is the SQuape Arise RTA, a high-end atomizer made in Switzerland ! The SQuape Arise is manufactured by StattQualm Vape AG. The Arise is a successor to the SQuape N[duro] and incorporates the advantages of the SQuape E[motion] Direct to lung (DL) and Mouth to lung (MTL) this atomizer is as versatile as it gets. The SQuape A [rise] offers the following advantages: intelligent current conduction, non-conductive surface structure of the complete atomization chamber (made of enamelled aluminium), closing of the 4ml tank by a simple rotation. The tank can be carried separately from the base, even when full. Before the first use, it is necessary to insert the supplied closing ring. We recommendusing the SQuape A[rise] in a resistance range of 0.3 to 2 ohms and a power range of 7 to 55 watts. Please note that too much power may cause the atomizer body to heat up. This is only a recommendation.
-
285.00 CHFSOLD WITHOUT BATTERY Introducing the Dani Box 21700 from Dicodes ! The Dani Box 21700, designed by the high-end German manufacturer Dicodes whose reputation is well established. This box is compatible with the 21700 and 20700 batteries (not supplied) and develops a maximum power of 80W. This electronic box with a sober and elegant design works thanks to a high-end chipset responsive and reliable and accepts atomizers up to 25mm in diameter. The Dani Box 21700 is equipped with a protection against polarity reversal and you will quickly feel at ease with its intuitive and versatile menu.
-
329.00 CHFSOLD WITHOUT BATTERY Another marvel from Dicodes here is the Dani SBS (side-by-side) 18650 ! Operating with a 18650 battery (not included) and with the renowned chipset of Dicodes This electronic box develops a maximum power of 80W. The Dani SBS does not have a USB port, so you will have to recharge the battery with an external charger available click HERE. You will easily master the menu interface which is very intuitive, you can also configure the buttons to choose on which side you want to have the fire button according to the orientation of the box. Several modes are available as the temperature control for example. The Dani SBS accepts atomizers up to 25mm in diameter. Reliable, compact and sober this box is made for you !
Showing 1-32 of 39 item(s)