IN PACKS OF 5 UNITS Here are the P Series resistors from Geek Vape ! P Series resistors are compatible with the Aegis Eteno E100I pod, the Aegis Eteno E100 pod and the Eteno E100 Cartridge. These resistors are also compatible with: Aegis Boost Pro Pod, Aegis Boost Pro 21700 Pod, Aegis Boost Pro Cartridge, Z100C DNA Pod, Z100C Cartridge, Cartridges and Aegis Boost Pro 2 (B100) Pod. The P Series Resistors are ideal for a DL (direct) draw, they are made of Kanthal A1 mesh, have excellent flavour rendition and produce a large volume of vapour. These resistors are available in three versions: 0.15 Ohm XM, 0.2 Ohm and 0.5 Ohm.       Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     0,5 OHM CURRENTLY BEING RESTOCKED

IN PACKS OF 5 UNITS Here are the G Series resistors from Geek Vape ! The G Series resistors work with the Siren G MTL clearomizer. These resistors are available in: Mesh of 1.2 Ohm, to use between 9.5 and 11.5 Watts compatible with high levels of nicotine, nicotine salts and CBD.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

Geek Vape offers you its Micro Mesh + Cotton for the Zeus X Mesh RTA ! Here is everything you need to use your Zeus X Mesh RTA.  Included in the pack are two replacement Micro Mesh sheets and cotton ! Thanks to its larger heating surface, the Mesh has an incomparable flavour reproduction in addition to having an unprecedented responsiveness. Nothing could be easier to assemble if you are eager to get into the world of rebuildable, it's up to you ! Pack of 2 Mesh with 2 cotton pads, available in Kanthal or Nichrome.    Compatible with the Dead Rabbit M RTA    

Geek Vape offers the Aegis Boost Cartridge for the Aegis Boost Kit. The original cartridge of your Kit Aegis Boost is worn, or you want to vaper several flavors during the day ? Here is the solution: the Aegis Boost Cartridge + 2 resistors ! Similar to the original, this cartridge has a capacity of 3,7ml.Aegis Boost Cartridge is delivered with the two resistors:- 1 of 0.4 Ohm (pre-installed), to use between 25 and 33 watts. - 1 of 0.6 Ohm, to use between 15 and 25 watts.   

IN PACK OF 5 UNITS Here are the B Series resistors from Geek Vape ! B Series Resistors work with the Aegis Boost Pod Kit, Z Nano 2 clearomizer, Aegis Boost Plus Pod etc. These resistors come in four models. In 0.2 Ohm Mesh, use between 50 and 58 Watts for direct inhalation. In 0.3 Ohm Mesh, use between 30 and 38 Watts for direct inhalation. In 0.4 Ohm Mesh, use between 25 and 33 Watts for direct inhalation. In 0.6 Ohm Mesh, to be used between 15 and 25 Watts for a tighter draw.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 5 UNITS Geek Vape offers these Supermesh resistors for the clearomizer Cerberus ! The Supermesh resistors are made of cotton and use Mesh technology, which increases their life span and the rendering of flavours. Supermesh resistors are available in two versions: X1 in 0.2 Ohm to be used between 60 and 70 Watts. X2 in 0.4 Ohm to be used between 50 and 60 Watts.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

IN PACKS OF 5 UNITS Geek Vape offers you the NS Flint Resistors ! The NS Resistors are designed for the Flint Kit from Geek Vape. They are intended for MTL (indirect) inhalation and are made of NI80 and pure organic cotton. Available in two values: In 1.6 Ohm between 6,4 and 9 Watts     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    

Geek Vape offers you its Z Series Resistors ! These resistors are designed for use with the Zeus Sub Ohm Clearomizer and the Z Fli Clearomizer. The Z Series resistors are made of Mesh and have a large heating surface which intensifies the flavours and develops a large quantity of vapour. These resistors are available in 6 versions: Z Series Resistors: 0.15 Ohm, for use between 80 and 90 Watts Z Series Resistors: 0.20 Ohm, for use between 70 and 80 Watts Z Series Resistors: 0.25 Ohm (dual coils) for use between 45 and 57 Watts Z Series Resistors: 0.40 Ohm, for use between 50 and 60 Watts Z Series XM Resistors: 0.15 Ohm for use between 70 and 85 Watts Z Series XM Resistors: 0.4 Ohm for use between 50 and 60 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.