Resistances and Coils for electronic cigarette in Switzerland

Resistors and Coils

The Resistor, also known as the coil, is a central component of your e-cigarette. The Resistor is located inside the Atomizer (sometimes called the Clearomizer) and is responsible for vaporising your E-liquid. The Resistor is made up of a sort of small metal tube, inside which is cotton or sometimes fibre, which absorbs the E-liquid by capillary action. A resistive wire is wound around this cotton, and when your e-cigarette is activated the wire will heat up and the Resistor will evaporate the E-liquid.

Resistors play a vital role in the vapourisation of E-liquid. The resistor, often made of metal wires such as Kanthal, Nichrome or SS316, is the heating core of the Atomizer.

Regular replacement of resistors is essential to maintain vape quality. Over time, resistors become clogged and lose their effectiveness, which can alter the taste of the vapour and reduce the overall performance of the electronic cigarette.

Resistors are part of the consumables family and have a lifespan of around 2 weeks, so they need to be changed regularly. Of course, this lifespan varies according to the power (Watts) used, the frequency with which you vape and the type of e-liquid a rich e-liquid, for example, clogs the Resistor more quickly.

Several materials are used in the composition of a resistor or coil: the resistive wire can be made of Kanthal for even heating, SS316 for some resistors, which is much more reactive, and Nichrome for others. Some resistors are made up of a sort of mesh instead of a resistive wire, which will optimise the vapour and flavours because a larger surface area will be in contact with the cotton.

There are two categories of resistors: Sub Ohm (less than 1 Ohm) used mainly for high-wattage vaping and direct draw. MTL (indirect draw) resistors, generally from 0.8 Ohm upwards, used mainly for nicotine salts.

The Resistor, in the form of a coiled coil, is heated by the power supply from the electronic cigarette battery. This process generates heat which is transmitted to the E-liquid. This heat raises the temperature of the liquid, transforming it into vapour. The quality of the resistor has a direct influence on the quality of the vape produced, the flavour, the density of the vapour and the lifespan of the Atomizer.

Resistors are available in various configurations, offering different levels of electrical resistance, expressed in Ohms. Resistors with a lower ohmic value generate more vapour and higher heat, while those with a higher resistance offer a tighter draw and more moderate vapour production.

In short, resistors are crucial components of the electronic cigarette, responsible for heating the e-liquid to produce vapour. The choice and regular maintenance of resistors are essential for an optimal vaping experience.

  • 9.90 CHF
    PACK OF THREE UNITS Aspire offers its Arc Revvo Boost 0.1 Ohm - 0.14 Ohm resistors ! These resistors are compatible with the Revvo clearomizer.  The recommended power is 70 Watts to 80 Watts.    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 13.90 CHF
    PACK OF 5 UNITS Eleaf offers you the EC2 Resistors ! Introducing the EC2 Resistors which are made from Kanthal and organic cotton. Whether you are looking for a generous vapor or an intense flavor experience, Eleaf's EC2 Resistors are here to meet your expectations. Enjoy exceptional flavour rendition and abundant vapour, while benefiting from the reliability and durability of Eleaf products.     Available in two versions: 0.3 Ohm for use between 30 and 60 Watts 0.5 Ohm for use between 30 and 100 Watts     EC2 resistors are compatible with Melo and IJust clearomizers.    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 14.90 CHF
    PACK OF 5 UNITS Eleaf offers you the EC-M Resistors in 0,15 Ohm ! The EC-M resistors are made of Kanthal mesh and organic cotton. They are available in 0.15 Ohm. These resistors should be used between 30 and 75 Watts. The EC-M Resistors are compatible with the Melo 3, Melo 4, iJust 2, Atlantis from Aspire and Target Pro from Vaporesso.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 9.50 CHF
    IN PACKS OF 5 UNITS Vaporesso offers you the EUC Traditional Resistors ! Here are the EUC (Eco Universal Coil) resistors compatible with Veco clearomizers from Vaporesso as well as EUC compatible clearomizers.    Available in three versions: EUC Traditional in 0.3 Ohm Resistors for use between 35 and 40 Watts EUC Traditional 0.4 Ohm resistors for use between 40 and 50 Watts EUC Traditional 0.5 Ohm resistors for use between 35 and 40 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 9.50 CHF
    PACK OF 5 UNITS Vaporesso offers EUC Ceramic Resistors ! Here are the EUC (Eco Universal Coil) Resistors compatible with Veco clearomizers from Vaporesso as well as EUC compatible clearomizers.    Available in three values: EUC Ceramic Resistors in 0.3 Ohm for use between 35 and 40 Watts EUC Ceramic resistors in 0.5 Ohm for use between 25 and 35 Watts EUC Ceramic Resistors in 0.6 Ohm for use between 40 and 55 Watts PROMO 4 CHF    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 12.90 CHF
    IN PACKS OF 5 UNITS Eleaf offers you the GS Air Resistors ! GS Air Resistors are made of organic cotton.    Available in 5 versions: GS Air Resistors in 0.75 Ohm for use between 8 and 25 Watts GS Air Resistors in 0.8 Ohm for use between 8 and 13 Watts GS Air Resistors in 1.2 Ohm for use between 8 and 30 Watts GS Air Resistors in 1.4 Ohm for use between 6 and 12 Watts GS Air Resistors in 1.5 Ohm for use between 8 and 20 Watts    These Resistors give good flavour and have a long life span.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   
  • 10.50 CHF
    PACK OF 5 UNITS Introducing the Prism T18 Resistors from Innokin ! These resistors are compatible with the Prism T18 and T22 clearomizers from Innokin. These resistors of 1.5 Ohm are equipped with a double coil to boost the production of steam and the rendering of flavors. The twenty holes of the resistor promotes the absorption of liquid.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   
  • 12.90 CHF
    IN PACKS OF 5 UNITS Discover the BF Cubis AIO resistors of the manufacturer Joyetech ! These resistors are compatible with the Cubis clearomizer from Joyetech.     The BF Cubis AIO Resistors are available in 4 versions: In 0.5 Ohm BF SS316 In 0.6 Ohm BF BSS316 In 1 Ohm BF SS316 In 1.5 Ohm BF clapton     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 8.50 CHF 3.60 CHF
    PACK OF 3 UNITS Vaporesso we offer you the GT2 NRG Resistors ! The NRG GT2 0.4 Ohm resistors are made of Kanthal and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam. These resistors are designed to be used between 55 and 65 Watt. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The whole GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     
  • 10.50 CHF
    PACK OF 3 UNITS Vaporesso offers you the GT4 NRG resistors ! The NRG GT4 0.15 Ohm resistors are made of two Kanthal coils and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam. These resistors are designed to be used between 30 and 70 Watts. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The entire GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     
  • 11.50 CHF
    PACK DE 3 UNITÉS Vaporesso we offer you the GT6 Core Resistors ! The GT6 Core 0.2 Ohm resistors are made of Kanthal and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam. These resistors are designed to be used between 40 and 100 Watts. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The whole GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     
  • 10.50 CHF
    PACK OF 3 UNITS Vaporesso we offer you the GT CCELL resistors ! The GT CCELL 0.5 Ohm resistors are ceramic, single coil and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam. These resistors are designed to be used between 20 and 35 Watts. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The whole GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.     
  • 10.50 CHF 5.60 CHF
    PACK OF 3 UNITS Vaporesso we offer you the GT CCELL2 resistors ! The GT CCELL2 0.3 Ohm resistors are ceramic, single coil and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam.  These resistors are designed to be used between 35 and 40 Watts. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The whole GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 9.50 CHF
    PACK OF THREE UNITS Vaporesso offers you the GT Mesh Coil Resistors ! The GT Mesh Coil 0.18 Ohm resistors are made of Mesh sheet and Japanese organic cotton. You will have a good rendering of flavors and a dense volume of steam. These resistors are designed to be used between 50 and 90 Watts. Compatible with NRG, NRG SE, NRG PE, Skrr, Cascade clearomizers, with the Sky Solo kit, the Cerberus from Geek Vape and with the TFV9 from Smok. The whole GT Core range is available on our website.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 12.90 CHF
    IN PACKS OF 5 UNITS Here are the BVC Nautilus / Triton Mini resistors from the manufacturer Aspire ! These resistors are compatible with Nautilus clearomizers.     The BVC Nautilus / Triton Mini resistors are available in 8 different values:    BVC Nautilus 0.3 Ohm (Mesh) Resistor for use between 23 and 28 Watts BVC 2S 0.4 Ohm Resistor for use between 23 and 28 Watts BVC Nautilus 0.7 Ohm Resistor for use between 18 and 23 Watts BVC 2S 0.7 Ohm (Mesh) Resistor to be used between 20 and 25 Watts BVC Nautilus 1.0 Ohm (Mesh) resistor for use between 13 and 15 Watts Triton Mini 1.2 Ohm (Kanthal) resistor for use between 15 and 20 Watts BVC Nautilus 1.6 Ohm resistor for use between 7 and 12 Watts BVC Nautilus 1.8 Ohm resistor for use between 10 and 14 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 19.90 CHF
    IN PACKS OF 5 UNITS Here are the Resistances Cleito Resistances from Aspire ! These resistors are compatible with the Cleito clearomizer from Aspire. Available in two versions:    0.2 Ohm for use between 55 and 70 Watts 0.4 Ohm for use between 40 and 60 Watts    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.   
  • 18.90 CHF
    IN PACKS OF 5 UNITS Here are the Nautilus X / PockeX resistors from Aspire ! These resistors are compatible with the Nautilus X clearomizer, Nautilus XS clearomizer, PockeX AIO kit and PockeX anniversary edition AIO kit.    Available in four versions: 0,6 Ohm between 18 and 23 Watts (PockeX) 1.2 Ohm between 8 and 12 Watts (PockeX) 1.5 Ohm between 14 and 20 Watts (Nautilus X) 1.8 Ohm between 12 and 16 Watts (Nautilus X)    The Nautilus X / PockeX Resistors are designed for tight MTL or RDL drawdown.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 11.90 CHF
    IN PACKS OF 5 UNITS Here are the GS Air M 0.35 Ohm resistors of the manufacturer Eleaf ! The GS Air M 0.35 Ohm resistors are made of Mesh and are compatible with the Gs Air clearomizers from Eleaf. These resistors provide a good volume of steam and intense flavors.    Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.    
  • 19.50 CHF
    IN PACK OF 5 UNITS Vaporesso ccell Target Resistors ! With the Ccell Target Resistors you will not have dry hit or e-liquid rise and the flavors are beautifully delivered. These resistors are made of ceramic and have a great durability. Available in 0.6 Ohm. The Ccell Target resistors are compatible with the Melo 3, Melo 4 clearomizers from Eleaf and the Target clearomizer from Vaporesso.     Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.