Arcana 22 RTA - Arcana Mods

The Arcana 22 RTA is the latest rebuildable atomizer manufactured by Arcana Mods and Pipeline Store. 

With its 22mm diameter and 3.5ml tank, the Arcana 22 is suitable for an MTL draw.

The Arcana 22 RTA is designed for MTL (mouth-to-lung), but can be converted to RDL or DL. (parts not supplied with the Arcana 22 RTA)

This atomizer is designed for a single coil, the manufacturer recommends a coil with a diameter of 2.5mm.

The atomizer is made of 316L stainless steel and has no O-rings visible from the outside.

Useful information

To install the cotton:

- Insert and gently pull the cotton through the coil.

- Cut both ends of the cotton flush with the base, for best results we recommend cutting the cotton at an angle.

- Trim the ends of the cotton if necessary and place them in the notches provided.

(It is not necessary to taper the cotton if it is cut diagonally)

To fill:

Turn the top cap anti-clockwise, this will close the liquid inlet and open the top cap.

Remove the top cap and fill the tank with e-liquid, now turn the top cap clockwise, this will close the atomizer and open the E-liquid inlet.

For transport, it is recommended to close the E-liquid inlet by turning the tank counter-clockwise.

Airflow:

The airflow can be fine-tuned with four perforated screws that screw in from below, via the positive pole, this is very convenient as there is no need to dismantle the coil.