Vaporesso - Kit Pod Gen Air 40
32.90 CHF
Tax included
Here is the Kit Pod Gen Air 40 from Vaporesso !
The Gen Air 40 Pod is powered by an internal 1800mAh battery and develops a maximum power of 40 Watts.
You can quickly recharge your Gen Air 40 kit thanks to its USB-C port.
With the powerful and responsive Axon chipset, you'll have no trouble mastering this box.
This little gem has a 4.5ml PCTG Gen Air 40 Cartridge that fills from the side.
The cartridge has the SSS technology that will prevent any risk of leakage of e-liquid.
With its adjustable airflow AOP (Adjustable Airflow On Pod) the loss of air at the entrance is almost non-existent, thanks to this the flavours will be boosted, you can also choose between a tight draw MTL and a restrictive direct draw RDL.
GTX Resistors from 0.3 Ohm upwards are compatible with the Pod Gen Air 40 cartridge.
The Gen Air 40 Pod Kit is incredibly lightweight and ergonomic, so it's easy to carry around !
The Gen Air 40 will not leave you indifferent, that's for sure !
Remember to change your resistor regularly.
It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
Secure HTTPS TRANSACTIONS
FREE SHIPPING from CHF 50.
CONTACT US by phone and email.
Gen Air 40
The Gen Air 40 Pod is powered by an internal 1800mAh battery and develops a maximum power of 40 Watts. You'll be able to quickly charge your Gen Air 40 kit thanks to its USB-C port. With the powerful and responsive Axon chipset, you'll have no trouble mastering this box. The Gen Air 40 Kit Pod is incredibly light and ergonomic, so you can easily carry it anywhere you go !
GTX resistors (0.3 Ohm and above) are compatible with the Gen Air 40.
0.3 Ohm GTX resistor (mesh) air draw DL for use between 32 and 45W 0.4 Ohm GTX mesh resistor RDL for use between 26 and 32W 0.6 Ohm GTX resistor (mesh) RDL draw to be used between 20 and 30W 0.8 Ohm GTX resistor (mesh) RDL draw to be used between 12 and 20W 1.2 Ohm GTX resistor (mesh) MTL tight draw for use between 7 and 11W 1.2 Ohm GTX resistor (regular) MTL tight draw for use between 8 and 12W |
 |
 |
Cartridge
This little wonder has a 4.5ml PCTG cartridge that fills from the side. The cartridge has the SSS technology which will avoid any risk of leakage of e-liquid. With its adjustable airflow AOP (Adjustable Airflow On Pod) the loss of air at the entrance is almost non-existent, thanks to this the flavours will be boosted, you can also choose between a tight draw MTL and a restrictive direct draw RDL. GTX resistors from 0.3 Ohm are compatible with the Gen Air 40 Pod cartridge. |
Settings
You can set the voltage and this setting is indicated by LED:
1 LED = 3V 2 LED = 3.2V 3 LED = 3.4V 4 LED = 3.6V
The battery charge level is also indicated by LED:
1 LED = 0 to 25% 2 LED = 25 to 50% 3 LED = 50 to 75% 4 LED = 75 to 100% |
 |
- ◊◊◊◊◊ -
Contents of the pack:
1 Box Gen Air 40
1 x 4.5 ml cartridge
1 GTX 0.4 Ohm resistor
1 GTX 0.8 Ohm resistor
1 USB-C cable
1 User manual
- ◊◊◊◊◊ -
Remember to change your resistor regularly.
It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
Brand
Data sheet
- Country of manufacture
- China
- Use
- Direct Inhalation (DL) and Indirect Inhalation (MTL)
- Capacity
- 4.5 ml
- Battery type
- Integrated
- Maximum power
- 40 Watts
- Filling
- Lateral
- Airflow
- Adjustable
You might also like
Vaporesso - Kit Pod Gen Air 40
Kit Pod Gen Air 40 Vaporesso