Falcon Infinity 55K Coil + Mixed Berries E-Liquids JNR

Falcon Infinity 55K resistor with Mixed Berries e-liquids

Is your Falcon Infinity 55K resistor reaching the end of its life? There’s no need to replace your whole device. With the JNR Falcon Infinity 55K Resistor + Mixed Berries E-liquids Pack, you’ll have all the consumables you need to get your device up and running again.

The pack includes a brand-new 0.6 ohm mesh resistor as well as two 10 ml bottles of Mixed Berries e-liquid with nicotine salts, totalling 20 ml. Simply keep the battery and the 10 ml cartridge from your original kit, replace the used resistor and then refill the tank.

As for flavours, Mixed Berries combines several red berries in an intensely fruity blend. Sweetness, juiciness and a few slightly tangy notes come together in a generously sweet recipe, accompanied by a hint of freshness.

Important: this pack is sold without a battery or cartridge. It is intended exclusively for users who already own a Falcon Infinity 55K and have kept the 10 ml tank supplied with their starter kit.

Give your Falcon Infinity 55K a new lease of life

The Falcon Infinity 55K is designed so that you can replace consumables that have reached the end of their life without having to buy a whole new kit.

The 1000 mAh rechargeable battery and the 10 ml refillable cartridge from your original kit are retained. When the resistor is worn out and your e-liquid bottles are empty, only the necessary consumables are replaced.

This Mixed Berries pack therefore provides a new 0.6 ohm mesh resistor along with two bottles of e-liquid so you can continue using your Falcon Infinity 55K.

Remove the old resistor from the cartridge, fit the new resistor, then fill the tank with the Mixed Berries e-liquid provided. Once you have properly primed the resistor, your Falcon Infinity 55K is ready to go again.

The 10 ml cartridge is not included in this pack. So do remember to keep the one you received with your Falcon Infinity 55K kit.

A 0.6 ohm Mesh resistor for the Falcon Infinity 55K

The Falcon Infinity 55K system uses a removable 0.6 ohm Mesh resistor.

As the resistor is not permanently integrated into the cartridge, it can be removed and replaced when it reaches the end of its life. This means you can continue to use the same 10 ml tank instead of having to replace the entire unit.

Mesh technology provides an extended heating surface to promote even vapourisation of the e-liquid and consistent flavour delivery.

With Mixed Berries, it complements the rich character of the blend and allows you to savour the various fruity nuances of this red fruit cocktail.

A resistor designed to be used with two bottles

The 0.6-ohm Mesh resistor included in this pack is designed for use with two 10 ml bottles of Mixed Berries, totalling 20 ml of e-liquid.

The first bottle allows you to fill the 10 ml cartridge completely. Once this is finished, the second bottle allows you to refill it again.

You’ll therefore have a new resistor and 20 ml of e-liquid to start a new cycle with your Falcon Infinity 55K.

However, the actual lifespan of a resistor may vary depending on frequency and conditions of use. A significant reduction in flavour, reduced vapour production or the persistent presence of an unusual taste may indicate that it is time to replace the resistor.

How do you replace the resistor on the Falcon Infinity 55K?

Start by removing the cartridge from your Falcon Infinity 55K, then carefully remove the used resistor from the tank.

Next, fit the new 0.6 ohm mesh resistor into place, ensuring it is correctly positioned.

Open the side tab on the cartridge, then fill the tank with the Mixed Berries e-liquid supplied. As the cartridge’s maximum capacity is 10 ml, one bottle is enough for a full refill.

Carefully close the tab after refilling.

When a new resistor has just been fitted, it is important to wait around 10 minutes before vaping.

This waiting period allows the cotton inside the resistor to soak up the e-liquid properly and reduces the risk of heating a resistor that is not yet sufficiently saturated.

Mixed Berries: a generous blend of red berries

With Mixed Berries, JNR does not focus on any one fruit in particular. Instead, the recipe brings together various red berry flavours to create a harmonious, intense and particularly fruity blend.

From the very first puffs, the blend develops a juicy and generously sweet profile. The different berry notes blend together to deliver a combination of roundness, sweetness and a few livelier nuances.

Certain slightly tangy facets add depth to the blend and counterbalance its sweetness, without ever overpowering it.

The appeal of Mixed Berries lies precisely in this blend: rather than clearly distinguishing each individual berry, JNR aims for an overall sensation of a red fruit cocktail, with different nuances that follow one another and complement each other.

A touch of freshness rounds off the recipe. It remains subtle and serves mainly to enliven the fruit without turning Mixed Berries into an intensely Frozen flavour profile.

The result is a fruity, juicy, generously sweet, slightly tangy and subtly fresh e-liquid, true to the indulgent character of JNR’s puff-style recipes.

Two 10 ml bottles of Mixed Berries with nicotine salts

In addition to the 0.6 ohm Mesh resistor, this pack contains two 10 ml bottles of JNR Mixed Berries e-liquid, totalling 20 ml.

Each bottle is formulated with 20 mg/ml of nicotine in the form of nicotine salts.

As the Falcon Infinity cartridge has a maximum capacity of 10 ml, each bottle is sufficient for one full refill of the tank.

You therefore have two refills of Mixed Berries to go with the new Resistor supplied in the pack.

A pack of consumables without a battery or cartridge

This product is not a new, complete Falcon Infinity 55K kit.

It is a refill pack intended for users who already own a JNR Falcon Infinity 55K device.

The rechargeable battery is not supplied and the 10 ml cartridge is not included. You must therefore reuse these two components from your original kit.

The pack contains only the 0.6 ohm mesh resistor and the two 10 ml bottles of Mixed Berries.

This distinction is particularly important for the tank: do not throw away your tank when your resistor reaches the end of its life, as you will need it to fit the new resistor.

Why choose the Falcon Infinity 55K resistor with Mixed Berries?

This pack allows you to continue using your Falcon Infinity 55K by simply replacing the necessary consumables.

You keep the rechargeable battery and the 10 ml cartridge from your original kit, then replace the used Resistor with the new 0.6 ohm mesh Resistor supplied.

The two bottles of Mixed Berries then provide you with 20 ml of e-liquid containing nicotine salts at a concentration of 20 mg/ml.

You’ll thus have your Falcon Infinity 55K back with a new resistor and a juicy, generously sweet and slightly refreshing red berry blend, without any single berry flavour overpowering the others.

Once this new cycle is complete, you can choose to stick with Mixed Berries or select another flavour from the range of Falcon Infinity 55K-compatible consumables.

Title tag:Falcon Infinity 55K Mixed Berries ResistorMeta description:Falcon Infinity 55K 0.6 ohm mesh resistor with 20 ml of Mixed Berries nicotine salts at 20 mg/ml – a slightly refreshing red berry cocktail.