Falcon Infinity 55K Coil + Lady Killa E-Liquids JNR

Falcon Infinity 55K resistor with Lady Killa e-liquids

Is your Falcon Infinity 55K resistor reaching the end of its life? There’s no need to replace your whole device. With the JNR Falcon Infinity 55K Resistor + Lady Killa E-liquids Pack, you’ll have all the consumables you need to get your device up and running again.

The pack includes a brand-new 0.6 ohm mesh resistor as well as two 10 ml bottles of Lady Killa e-liquid with nicotine salts, totalling 20 ml. Simply keep the battery and the 10 ml cartridge from your original kit, replace the worn-out resistor, then refill the tank.

When it comes to flavours, Lady Killa combines three red fruits with complementary characteristics: a deep, slightly tart blackberry; a sweet, indulgent strawberry; and a livelier raspberry. A hint of freshness complements this generously sweet trio without overpowering the fruit flavours.

Important: this pack is sold without a battery or cartridge. It is intended exclusively for users who already own a Falcon Infinity 55K and have kept the 10 ml tank supplied with their original kit.

Give your Falcon Infinity 55K a new lease of life

The Falcon Infinity 55K is designed so that you can replace consumables that have reached the end of their life without having to buy a whole new kit.

The 1000 mAh rechargeable battery and the 10 ml refillable cartridge from your original kit are retained. When the resistor is worn out and your e-liquid bottles are empty, only the necessary consumables are replaced.

This Lady Killa pack therefore provides a new 0.6 ohm Mesh resistor along with two bottles of e-liquid so you can continue using your Falcon Infinity 55K.

Remove the old resistor from the cartridge, fit the new resistor, then fill the tank with the Lady Killa e-liquid supplied. Once you have properly primed the resistor, your Falcon Infinity 55K is ready to go again.

The 10 ml cartridge is not included in this pack. So remember to keep the one you received with your Falcon Infinity 55K kit.

A 0.6 ohm mesh resistor for the Falcon Infinity 55K

The Falcon Infinity 55K system uses a removable 0.6 ohm mesh resistor.

As the resistor is not permanently integrated into the cartridge, it can be removed and replaced when it reaches the end of its life. This means you can continue to use the same 10 ml tank rather than having to replace the whole unit.

Mesh technology offers an extended heating surface to promote even vapourisation of the e-liquid and consistent flavour delivery.

With Lady Killa, it allows you to enjoy the nuances of this fruity trio, from the rounded flavour of the strawberry to the livelier character of the raspberry, via the deeper notes of the blackberry. A resistor designed to last for two bottlesThe 0.6 ohm Mesh resistor included in this pack is designed to last for two 10 ml bottles of Lady Killa, totalling 20 ml of e-liquid.

The first bottle allows you to fill the 10 ml cartridge completely. Once this is finished, the second bottle allows you to refill it.

You’ll then have a new Resistor and 20 ml of e-liquid to start a new cycle with your Falcon Infinity 55K.

However, the actual lifespan of a Resistor may vary depending on the frequency and conditions of use. A significant reduction in flavour, less vapour production or the persistent presence of an unusual taste may indicate that it is time to replace the resistor.

How do you replace the resistor on the Falcon Infinity 55K?

Start by removing the cartridge from your Falcon Infinity 55K, then carefully remove the used resistor from the tank.

Next, fit the new 0.6 ohm mesh resistor into place, ensuring it is correctly positioned.

Open the side flap of the cartridge, then fill the tank with the Lady Killa e-liquid supplied. As the cartridge’s maximum capacity is 10 ml, one bottle is sufficient for a full refill.

Carefully close the tab after filling.

When a new resistor has just been fitted, it is important to wait around 10 minutes before vaping.

This waiting period allows the cotton inside the resistor to soak up the e-liquid properly and reduces the risk of heating a resistor that is not yet sufficiently saturated.

Lady Killa: a trio of blackberry, strawberry and raspberry

With Lady Killa, JNR doesn’t settle for a simple, generic blend of red berries. The recipe brings together three distinct flavours, each of which plays a role in the overall balance.

The blackberry brings the deepest dimension to the blend. Fruity, rich and slightly tangy, it gives the recipe character and establishes a more intense base.

The strawberry, on the other hand, adds more sweetness. Juicy, rounded and indulgent, it softens the overall flavour and enhances Lady Killa’s generously sweet character.

Finally, the raspberry enlivens the trio with a livelier flavour. Its slightly tangy profile adds depth and creates an extra contrast with the roundness of the strawberry.

Lady Killa’s balance therefore rests on three complementary sensations: the depth of the blackberry, the indulgent sweetness of the strawberry and the liveliness of the raspberry.

A slight hint of freshness accompanies the fruits and adds further vibrancy to the blend without turning it into a full-blown ‘Ice’ profile.

The result is a fruity, juicy, generously sweet, slightly tangy and subtly fresh e-liquid, with a trio of red fruits that is more distinct than a simple berry cocktail.

Two 10 ml bottles of Lady Killa with Nicotine Salts

In addition to the 0.6 ohm Mesh Resistor, this pack contains two 10 ml bottles of JNR Lady Killa e-liquid, totalling 20 ml.

Each bottle is formulated with 20 mg/ml of nicotine in the form of Nicotine Salts.

As the Falcon Infinity cartridge has a maximum capacity of 10 ml, each bottle is sufficient for a full refill of the tank.

You therefore have two refills of Lady Killa to go with the new Resistor supplied in the pack.

A pack of consumables without a battery or cartridge

This product is not a new, complete Falcon Infinity 55K kit.

It is a refill pack intended for users who already own a JNR Falcon Infinity 55K device.

The rechargeable battery is not supplied and the 10 ml cartridge is not included. You must therefore reuse these two components from your original kit.

The pack contains only the 0.6 ohm mesh resistor and the two 10 ml bottles of Lady Killa.

This distinction is particularly important for the tank: do not throw away your tank when your resistor reaches the end of its life, as you will need it to install the new resistor.

Why choose the Falcon Infinity 55K resistor with Lady Killa?

This pack allows you to continue using your Falcon Infinity 55K by simply replacing the necessary consumable parts.

You keep the rechargeable battery and the 10 ml cartridge from your original kit, then replace the used resistor with the new 0.6 ohm mesh resistor supplied.

The two bottles of Lady Killa then provide you with 20 ml of e-liquid containing nicotine salts at a concentration of 20 mg/ml.

You’ll thus have your Falcon Infinity 55K back with a new resistor and a flavour that combines rich blackberry, indulgent strawberry and zesty raspberry, all accompanied by a subtle hint of freshness.

Once this new cycle is complete, you can choose to stick with Lady Killa or select another flavour from the range of Falcon Infinity 55K-compatible consumables.

Title tag:Falcon Infinity 55K Lady Killa ResistorMeta description:Falcon Infinity 55K 0.6 ohm mesh resistor with 20 ml of Lady Killa nicotine salts e-liquid (20 mg/ml), featuring flavours of blackberry, strawberry and raspberry.