Falcon Infinity 55K Kit – Lady Killa JNR

JNR Falcon Infinity 55K Lady Killa Kit: blackberry, strawberry and raspberry

The JNR Falcon Infinity 55K Lady Killa Kit combines three classic red berries with a refillable system designed to preserve the device’s key components over time.

The Lady Killa blend brings together a deep, slightly tart blackberry, a sweeter, more indulgent strawberry and a vibrant, fruity raspberry. Three complementary flavours combined in a generously sweet blend, enhanced by a subtle hint of freshness.

The Falcon Infinity 55K also stands out for its design. It features a 1000 mAh rechargeable battery, a 10 ml refillable cartridge and a replaceable 0.6 ohm mesh resistor. Once the resistor is worn out, the battery and tank can be reused.

To get started with the system, JNR provides two 10 ml bottles of Lady Killa e-liquid, each containing 20 mg/ml of nicotine, totalling 20 ml.

Falcon Infinity 55K: a new take on JNR’s ‘big puff’

The Falcon Infinity 55K retains the ease of use associated with JNR’s ‘big puff’ devices, but significantly alters how they work thanks to components that can be kept or replaced separately.

The device comprises three main components: a built-in rechargeable 1000 mAh battery, a 10 ml tank and a removable 0.6 ohm mesh resistor.

When purchased for the first time, the Lady Killa kit includes all these components as well as the two bottles of e-liquid needed to get started.

Once the 20 ml has been used up and the resistor reaches the end of its life, there is no need to buy a whole new device.

You simply keep the battery and the cartridge, then fit a new compatible resistor before refilling the tank.

The Falcon Infinity 55K therefore functions more like a refillable system: the complete kit serves as a starting point, whilst subsequent use requires only the replacement of consumables.

A 10 ml refillable cartridge to keep

The Falcon Infinity 55K’s cartridge offers a generous capacity of 10 ml, which corresponds exactly to the contents of one of the Lady Killa bottles supplied.

Its transparent tank makes it easy to check the amount of e-liquid available without having to remove the cartridge.

Refilling is done via an opening on the side. This design allows the same tank to be refilled several times rather than having to replace the cartridge every time.

Another important difference is that the resistor is not permanently integrated into the pod.

Once worn out, it can be removed and replaced separately. The 10 ml cartridge can therefore still be used with the new coil.

It is important to keep the tank supplied with the Falcon Infinity 55K kit, as resistors are sold without a new cartridge.

A removable 0.6 ohm mesh resistor

JNR equips its Falcon Infinity 55K with a 0.6 ohm mesh resistor.

Its mesh structure provides an extended heating surface to ensure even vapourisation of the e-liquid and effectively deliver the various flavour nuances of the Lady Killa blend.

But its main advantage lies above all in its removable design.

When the coil reaches the end of its life, you can simply remove it from the tank and then fit a new 0.6 ohm resistor.

This solution separates the coil’s lifespan from that of the cartridge: a worn-out resistor therefore no longer means you have to replace the entire tank.

How do you fill the Falcon Infinity 55K?

To fill your Falcon Infinity 55K, open the tab on the side of the cartridge.

Then insert the tip of the bottle into the opening and pour the e-liquid into the tank up to its maximum capacity of 10 ml.

Close the tab carefully before replacing or using the cartridge.

When a new resistor has just been fitted, it is essential to allow the cotton to soak up the e-liquid properly before using it for the first time.

Once the tank is full, wait approximately 10 minutes before vaping.

This priming period allows the e-liquid to properly reach the cotton inside the coil and reduces the risk of prematurely damaging a new resistor, which can result in a burnt taste.

A resistor designed for both Lady Killa bottles

The Falcon Infinity 55K Lady Killa kit includes 20 ml of e-liquid, divided between two 10 ml bottles.

The 0.6-ohm mesh resistor supplied is designed for use with these two bottles.

The process is therefore particularly simple: use your 20 ml of Lady Killa with the supplied resistor, then keep the battery and tank when it’s time to replace your consumables.

You can then fit a new resistor and refill the cartridge using the bottles supplied with compatible consumables.

The actual lifespan of the resistor may, however, vary depending on frequency and conditions of use. A significant loss of flavour, reduced vapour production or the appearance of an unusual taste may indicate that the resistor needs replacing.

Lady Killa: blackberry, strawberry and raspberry combined

With Lady Killa, JNR doesn’t settle for a generic blend of red fruits. The recipe highlights three fruits with very distinct characteristics.

The blackberry brings a deep flavour with a slightly tart edge. It is accompanied by a sweet and indulgent strawberry, which adds more roundness to the blend.

Finally, the raspberry completes the trio with a livelier and slightly tart profile, adding further depth to the overall flavour.

These three fruits complement one another as you vape: the strawberry softens the blend, whilst the blackberry and raspberry enhance its fruity character.

A hint of freshness rounds off the recipe without masking the main flavours.

Lady Killa is therefore aimed at lovers of sweet and slightly fresh red fruits, with a clearly distinguishable trio of blackberry, strawberry and raspberry.

Two 10 ml bottles at 20 mg/ml included

The Falcon Infinity 55K Lady Killa Kit comes with two 10 ml bottles of e-liquid, making a total of 20 ml.

Each Lady Killa bottle is formulated to contain 20 mg/ml of nicotine.

As the cartridge itself has a maximum capacity of 10 ml, each bottle is sufficient for one full refill of the tank.

The two bottles therefore allow for two full refills before moving on to the next set of consumables.

1000 mAh rechargeable battery with display

The Falcon Infinity 55K features a built-in 1000 mAh battery designed to be recharged and stored.

A display located at the bottom of the device allows you to quickly check the remaining battery level and see when recharging is required.

To top up the battery, the Falcon Infinity 55K has a USB-C port.

The USB-C charging cable is not supplied with the kit.

Why choose the Falcon Infinity 55K Lady Killa?

The Falcon Infinity 55K takes the traditional ‘big puff’ experience to the next level whilst retaining the device’s key components.

Its 1,000 mAh battery is rechargeable, its 10 ml tank can be refilled, and its 0.6 ohm mesh resistor can be replaced separately.

After purchasing the initial kit, you therefore keep the battery and cartridge, replacing only the necessary consumables.

This design also allows you to switch flavours as you restock and discover the various flavours compatible with the Falcon Infinity 55K system.

In this Lady Killa version, JNR pairs its rechargeable device with a particularly fruity trio comprising blackberry, strawberry and raspberry, generously sweetened and complemented by a subtle hint of freshness.

A combination of three red fruits, each with its own distinct character, to help you discover the Falcon Infinity 55K, complete with 20 ml of e-liquid, a 1000 mAh rechargeable battery, a 10 ml cartridge and a replaceable mesh resistor.Title tag:JNR Falcon Infinity 55K Lady Killa KitMeta description:JNR Falcon Infinity 55K Lady Killa Kit with a 1000 mAh battery, 10 ml tank, 0.6 ohm mesh coil and 20 ml of blackberry, strawberry and raspberry e-liquid.