Millennium RTA Atomizer (Batch11)

Introducing the Millennium RTA, this 22mm diameter atomizer is intended for indirect draw (MTL).

The Millennium RTA is designed for a single coil setup, has a capacity of 4ml and is top-filling.

The Millennium has large slots for the cotton and there is plenty of room for the coil to be mounted, making your daily life easier.

This Atomizer is equipped with a liquid control and airflow control, in fact, you will have the possibility to change the bells and airflow pins to adapt your atomizer to your E-liquids to get all the flavors.

Bells and airflow pins

Three different bells are delivered with the Millennium, one already pre-installed plus two others: (Winston, Albert and Jet Bell) of 12mm, 13mm and 14mm.

With these bells you can get the best flavours from your E-liquids, you just have to test which one is the best, by putting only a few drops of E-liquid on your cotton, so you can easily change the bell without having to empty your Atomizer.

The cherry on top is that the bells can be replaced in a jiffy thanks to a bayonet system.

Two interchangeable airflow pins (1x1.8mm and 2x1.2mm) are also supplied with this Atomizer and in addition to that you will have an adjustable airflow ring in six different positions.

The six airflow holes are: (0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm and 1.8mm).

Inside the Millennium RTA tray is the P.A.S.S. (Pressure Augmentation and Silencing System)

The P.A.S.S. is a flow accelerator and silencing system, thanks to which you will always have a perfect and silent air flow.

No matter what the airflow setting is and even if you have it positioned on the largest holes, the P.A.S.S. will create a venturi effect that will accelerate and stabilize the airflow, great !