Brands
-
Arcana Mods
-
Aspire
-
Azlan
-
BD Vape
-
BP Mods
-
DotMod
-
Dovpo
-
Eleaf
-
Ennequadro Mods
-
Geek Vape
-
Hellvape
-
Horizon Tech
-
Hussar Vapes
-
Imist
-
Innokin
-
Kiwi Vapor
-
Lost Vape
-
Nevoks
-
QP Design
-
Reload Vapor
-
Smok
-
SQuape
-
Steam Crave
-
Steampipes
-
Suicide Mods
-
SvoëMesto
-
Taifun
-
The Vaping Gentlemen Club
-
Umbrella Mods
-
Vandy Vape
-
Vapefly
-
Vaperz Cloud
-
Vaporesso
-
Viper Smoke
-
Voopoo
.png "Back to the home page")
Atomizer
The atomizer with the resistance are the heart of your e-cigarette are they who create the steam. For conventional electronic cigarettes the atomizer consists of a base on which we install the resistance, a Pyrex tube that will constitute the tank, on it comes to screw a perforated cap, inside this perforation we insert the drip-tip (tip through which we suck the steam).
The Atomizer, a fundamental component of electronic cigarettes, plays an essential role in vaporising the e-liquid. The Atomizer works by heating the liquid, transforming it into a fine mist, ready to be inhaled. It is the Atomizer that generates the vapour that the vaper breathes.
The design of the Atomizer involves a sophisticated process. Inside the Atomizer is a heating Resistor which, when activated, raises the temperature of the e-liquid. This causes atomisation, where the liquid is transformed into tiny vaporised droplets. The Atomizer also regulates the airflow, influencing vapour density and draw.
An important aspect of the Atomizer is its durability. Atomizers are designed so that users can change the heating part (Resistor) without having to replace the whole unit. This offers flexibility and savings for vapers.
In short, the Atomizer is the vaping engine in an electronic cigarette, responsible for creating the inhalable vapour from the e-liquid. The quality of the atomizer directly influences the vaping experience, making its choice a crucial aspect for electronic cigarette users.
In the world of rebuildable we speak rather RBA atomizers (Re Buildable Atomizer) or repairable atomizers. With RBA atomizers the vapoteur can make himself his coils (resistances) the choices are multiple.
The family of RBA consists:
RDA atomizer called dripper is an atomizer without a tank.
Atomizer RTA with a tank or tank.
Atomizer RDTA which is a mix between a dripper and an atomizer tank.
Subcategories
Sort by:
-
10.50 CHFPACK OF THREE UNITS Voopoo offers you the Drag Nano 2 Cartridges. These replacement cartridges are for the Drag Nano 2 Pod Kit but are also compatible with the Vinci Pod Kit. This is the solution if you want to change your e-liquid quickly or simply replace a used cartridge. With a capacity of 2 ml, the Drag Nano 2 cartridges are filled from the top by removing the drip-tip. The Drag Nano 2 cartridges are designed for a tight draw (MTL) or a semi-tight draw (RDL). These cartridges have a built-in resistor, so you will need to change the entire cartridge when your resistor wears out. Two types of cartridges are available: 0.8 Ohm cartridges for RDL (direct restrictive) draw 1.2 Ohm cartridges for MTL (indirect) draw Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste. 0,8 OHM CURRENTLY BEING RESTOCKED
-
97.00 CHFThis is the Echo RTA Atomizer from French manufacturer Umbrella Mods ! Vapers who are fans of MTL will be delighted because this atomizer is a real little wonder. The Echo RTA is a single coil atomizer made of the best materials and specially designed for MTL (tight draw). This atomizer has a diameter of 22mm and a capacity of 3ml, it is filled from the bottom. For the draw, you will have the choice of 9 interchangeable perforated pins of different diameters, in addition to that, you can fine-tune the setting with the airflow ring. The Echo RTA Atomiser is incredibly well thought out and delivers great flavours, you will rediscover your e-liquids !
-
9.50 CHF 8.00 CHFIN PACK OF TWO UNITS (IN BULK) Vaporesso offers you the Aurora Play Cartridges ! The Aurora Play Cartridges are replacement cartridges for the Aurora Play Pod Kit. These cartridges have a capacity of 2ml and are filled from the top. The Aurora Play cartridges have a built-in 1.3 Ohm resistor. These cartridges are ideal for nicotine salts. CARTRIDGES SOLD IN BULK WITHOUT INDIVIDUAL PACKAGING.
-
29.90 CHFThis is the Zenith 2 Clearomizer from Innokin ! The Zenith 2 clearomizer has a diameter of 26 mm and has a tank capacity of 5.5 ml. The Zenith 2 is filled from the top by turning the top cap. This clearomizer has an adjustable airflow, so it will be very easy to choose your favorite draw. The Zenith 2 Clearomizer is designed for DL (direct) or MTL (indirect) inhalation. Two drip tips are supplied with the clearomizer, one for MTL and one for DL vaping. The Zenith 2 Clearomizer is compatible with Innokin Zenith & Zlide Resistors. Remember to change your resistor regularly. This will depend on how often you use it, but about every fortnight you should change it or when you smell something burning.
-
23.90 CHFVaporesso offers you the ITank Clearomizer. The ITank is a clearomizer designed for all vapers who love big clouds and intense flavours. This clearomizer has a diameter of 26 mm which offers a capacity of 8ml with the Pyrex bubble and 5ml with the straight Pyrex. The ITank has an adjustable airflow and a top filling system. Thanks to an ingenious system, the ITank is able to capture residual condensation and re-vaporise it to avoid leaks. It will allow you to enjoy long hours of pleasure while tasting your favourite e-liquids through its 510 drip tip. This clearomizer is compatible with GTI Resistors. Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
36.50 CHFVandy Vape presents its Kylin M Pro RTA atomizer ! The Kylin M Pro RTA is 24.5 mm in diameter and its tray is designed to accommodate a single sheet of Mesh resistive. Its large 8ml Bulb tank and straight 6ml Pyrex tank are both top-filling. The airflow ring just below the top cap prevents any risk of leakage. The Kylin M Pro is within the reach of everyone, the Mesh assembly is easy to do. Thanks to its template, all you have to do is form the Mesh strip, then place it in the terminals and finally tighten the screws. That's it, now all you have to do is install the cotton. The Kylin M Pro, a Mesh mounted tank ideal for fans of powerful flavours and big clouds. Comes with the Kylin M Pro RTA: 2 Mesh A1 0.15 Ohm 2 x 0.20 Ohm A1 Mesh 2 Cotton laces
-
35.00 CHFHellvape presents the Dead Rabbit V3 RDA dripper ! The Dead Rabbit V3 RDA is a dripper designed for a double coils assembly, the terminal block is slightly inclined to facilitate the assembly of the coils and for a better air circulation. The terminal block is also gold plated on the positive pole for better conductivity. Thanks to the space available in the Dead Rabbit V3 RDA you can easily install large coils. With the Dead Rabbit V3 RDA Hellvape has created a 24 mm diameter dripper with a double adjustable airflow. You can choose between two air inlets: either 15 small holes on each side or 3 large openings on each side. This dripper has a 5mm high tank and comes with a 510 BF pin for bottom feeder boxes.
-
9.90 CHFPACK OF 3 UNITS Arcana Mods offers the RDL Kit for the RTA Chariot Atomizer. The RDL Kit for the RTA Chariot Atomizer is designed by Arcana Mods and Pipeline. This kit is used to upgrade the RTA Chariot from an MTL draw to an RDL draw. The RDL kit consists of 3 screws with different diameters of holes: 1 screw with a 1.6 mm perforation 1 screw with a 1.8 mm perforation 1 screw with a 2 mm perforation
-
48.50 CHFCURRENTLY BEING RESTOCKED Introducing the Kumo RDTA Atomizer from Aspire X in collaboration with Steampipes. A new collaboration from Aspire, this time with high-end manufacturer Steampipes. The Kumo RDTA is a 24mm diameter atomiser with a capacity of 3.5ml. The Kumo RDTA has a tray that can accommodate a single coil. Two airflow rings are provided to change the look and airflow. The filling is done from the side.
-
17.50 CHFHere is the Clearomizer Nautilus Nano from Aspire ! The Nautilus Nano Clearomizer is versatile, thanks to him you can vaper with a MTL draw (tight), a RDL draw (restrictive direct). Two resistors are delivered with the Nautilus Nano, a 1.8 Ohm and a 1 Ohm mesh resistor. The Nautilus Nano is compatible with all BVC Nautilus Resistor. The Nautilus Nano clearomizer has a diameter of 21 mm, a capacity of 2 ml and has an adjustable airflow on 5 positions for a precise adjustment. Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
2.90 CHFIN PACKS OF 10 UNITS Introducing the Aspire Vilter Pod Filters ! These filters are only compatible with Aspire's Vilter Pod Kit and Vilter Cartridge. The Vilter Pod Filters mimic traditional cigarette filters.
-
7.90 CHFIN A PACK OF 2 UNITS Introducing the Vilter Cartridges from Aspire ! Vilter Cartridges are for the Vilter Pod Kit and the Vilter Pod Kit S. The Vilter Cartridges are magnetic and have a capacity of 2 ml. These cartridges are equipped with an integrated 1 Ohm mesh resistor and are filled from the bottom. The drip tip mimics the filter on a traditional cigarette, but a classic drip-tip can be fitted. Do not throw away the PET drip tip from your old cartridge, as it is not supplied with this pack of cartridges. Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
8.50 CHFPACK OF 2 UNITS Here are the Veego 80 cartridges of the manufacturer Nevoks ! These 3.5 ml cartridges are compatible with the Veego 80 Kit. The Veego 80 Cartridges are compatible with the SPL 12 resistors (sold separately) from Nevoks. The SPL 12 resistors are available in 3 versions: In 0,17 Ohm from 40 to 60 Watt In 0,3 Ohm from 30 to 50 Watt In 0,6 Ohm from 15 to 25 Watt Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
6.50 CHFSOLD INDIVIDUALLY Voopoo offers you the TPP-X Cartridges ! The TPP-X Cartridges are replacement cartridges for the Drag S Pro and Drag X Pro. The TPP-X cartridges are not only intended to change a damaged cartridge, they are also used for vapers who like to vary the flavors, indeed, they will be easy to change quickly e-liquid with a new cartridge. In addition to having a capacity of 5.5 ml, the TPP-X cartridges are compatible with TPP Resistors. And to top it all off, the TPP-X Cartridges are filled from the side by removing a small cap located on the top of the cartridge. Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
15.00 CHFEleaf offers its Clearomizer GS Air 4 ! The GS Air 4 Clearomizer has a tank capacity of 2.5 ml and an adjustable airflow. The filling is done from the top and the diameter of the GS Air 4 is 21.5 mm. The GS Air range of resistors are compatible with the GS Air 4. Two GS Air resistors are delivered with the GS Air 4 Clearomizer: 1 GS Air resistor of 0.8 Ohm 1 GS Air resistor of 1.4 Ohm
-
19.50 CHFInnokin presents the Clearomizer GoZ MTL ! The GoZ MTL is the original clearomizer of the GoZ Kit. The GoZ MTL Clearomizer has a capacity of 2 ml and a diameter of 20 mm. The GoZ MTL is filled from the top and this clearomizer is compatible with all Zenith resistances of Innokin. Thanks to its adjustable airflow you can easily switch from a MTL draw (tight) to a RDL draw (restrictive direct). The GoZ MTL Clearomizer perfectly reproduces all the flavors of your favorite e-liquids.
-
22.50 CHFHere is the clearomizer Nautilus 3 from Aspire ! The Nautilus 3 is versatile, thanks to him you can vaper with a draw MTL (tight), a draw RDL (direct restrictive) and even with a draw DL (direct, air) for the latter you will need to install a resistance BVC Nautilus 2S of 0.4 Ohm. Two resistors are supplied with the Nautilus 3, a 0.7 Ohm (mesh) resistor and a 1.8 Ohm resistor. The Nautilus 3 is compatible with all BVC Nautilus Resistor. The Nautilus 3 clearomizer has a diameter of 24 mm, a capacity of 4 ml and has an adjustable airflow on 7 positions for a precision setting. A mechanical valve will allow you to activate the automatic closure of the Nautilus so you no longer need to empty the tank for the change of resistance !
-
13.90 CHFVoopoo offers its Clearomizer PnP Tank ! Here is the Tank PnP, identical to the cartridges of the famous Drag S and Drag X but with a 510 thread so that it can be screwed on any box ! With a diameter of 26 mm and a capacity of 4.5ml, the PnP tank is compatible with all the PnP Resistors of Voopoo. The PnP tank is delivered with two PnP resistors, one of 0,3 Ohm and one of 0,15 Ohm. It is possible to adapt a rebuildable plate (not supplied) in order to make your own assemblies. The Tank PnP is filled from below and has an adjustable airflow.
-
34.00 CHFCURRENTLY BEING RESTOCKED Hellvape presents its Dead Rabbit V2 RTA ! The Dead Rabbit V2 RTA is an atomizer designed for a single or double coils, the terminal block is gold-plated on the positive pole for better conductivity. Thanks to the space available on the Dead Rabbit V2 RTA you can easily install large coils. Hellvape the Dead Rabbit V2 RTA is a 25 mm diameter atomizer with a capacity of 2ml with the straight Pyrex and 5ml with the Pyrex bubble. This atomizer fills from the top, has an adjustable airflow and offers excellent flavor reproduction.
-
13.50 CHFIN PACKS OF 2 UNITS SOLD WITHOUT RESISTORS Vaporesso offers you the Swag PX80 cartridges ! You are the lucky owner of a Kit Swag PX80 these cartridges are made for you ! Ideal for vapers wishing to use several different e-liquids during the day because the Swag PX80 cartridges can be changed in a fraction of a second with their magnetic system. In addition to having a capacity of 4ml they have an anti-leakage system, no need to empty the tank to change resistors. Compatible with GTX resistors. Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
47.50 CHFSuicide Mods hits hard with the Nightmare Mini RDA ! Here is the Nightmare Mini RDA of the American manufacturer Suicide Mods An atomizer (Dripper ) that will seduce all vapors fans of Cloud Chasing. The Nightmare Mini RDA has a 25 mm diameter plate on which two coils, even bulky, can easily be installed. This dripper is very airy and with its adjustable airflow it will be easy to find the ideal setting, moreover the Nightmare Mini RDA is compatible Bottom Feeder. It really has everything to please the greatest number of people this little gem from Suicide Mods. Most manufacturers are into MTL but this is not the case for Nightmare Mini RDA Suicide Mods The Nightmare Mini RDA focuses on the DL and on the big clouds and it's good because they do it wonderfully !
-
59.00 CHFCURRENTLY BEING RESTOCKED Steam Crave presents the Aromamizer Supreme V3 RDTA Advanced Kit ! Here is theAromamizer Supreme V3 RDTA Advanced Kit, an RDTA atomizer that can receive 6 ml of e-liquid with the Pyrex straight and 7 ml with the Pyrex bubble. The filling is done by unscrewing the top cap, you will have to close the juice-control to prevent any vacuum that will avoid any risk of leakage. The airflow will allow you to adjust the draught according to your preferences. This atomizer 25 mm in diameter will seduce you with its generosity and its incredible flavor rendering, long hours of vaping are in sight ! With the Aromamizer Supreme V3 RDTA Advanced Kit, Steam Crave hits hard by offering with this kit, in addition to the original single coil plate, a postless plate, a plate for a Mesh assembly and a Squonk pin. The reputation of Steam Crave the Aromamizer Supreme V3 RDTA Advanced Kit is sure to please you !
-
6.90 CHFIN PACKS OF 2 UNITS SOLD WITHOUT RESISTORS Here is the 2 pack of MTL Drag cartridges from Voopoo ! These cartridges Drag are absolutely simple to use, the insertion of the resistor is done from the bottom as well as the filling. These cartridges are intended for use with PNP Resistors above 0.3 Ohm. Voopoo offers you versatility with this pack of 2 MTL cartridges, in fact, these cartridges with a capacity of 2ml can work with many products of the brand: Drag S and X, Drag S and X Pro and Argus Pro. Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
25.90 CHFHere is the Zlide D22 from Innokin,the descendant of the famous Zenith ! Little brother of the Zlide D24, the Zlide D22 has a diameter of 22 mm, it has a tank capacity of 2 ml and a filling system from above. Innokin has evolved the filling system, before sliding the lid, remember to remove the Drip-Tip and close the air intake located at the bottom. With this clearomizer you will have the choice between all Zenith resistors, what to satisfy the greatest number ! The Zlide D22 of Innokin is very strong in its performance and innovations !
-
27.50 CHFInnokin presents the Zlide D24, a step further in the world of MTL ! The clearomizer Zlide D24 is an enlarged version of the Zlide D22 from 22 mm to 24 mm in diameter and can now accommodate 4 ml of e-liquid. The Zlide D24 retains all the assets that have made are success, the filling is still done from above and its adjustable airflow is located at the bottom. Thanks to the use of Zenith resistors, the Zlide D24 can be included in the list of the best clearomizers. The zenith resistors stand out for their long life and exceptional flavor rendition.
-
12.50 CHFIN PACKS OF 4 UNITS Vaporesso offers you Xros cartridges. The pack of 4 replacement cartridges is specially designed for the Xros 800 mAh pod kit of Vaporesso. You change the cartridge directly, no need to change the resistor. Two kinds of resistances are available: a Mesh resistor of 0.80 Ohm which produces more steam or a Mesh resistor of 1.20 Ohm for a tighter draw but which offers a very good restitution of flavors. These cartridges hold 2 ml. Ideal for use with 50PG/50VG e-liquids. Remember to change your cartridge regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
169.00 CHFCURRENTLY BEING RESTOCKED Here is the SQuape Arise RTA, a high-end atomizer made in Switzerland ! The SQuape Arise is manufactured by StattQualm Vape AG. The Arise is a successor to the SQuape N[duro] and incorporates the advantages of the SQuape E[motion] Direct to lung (DL) and Mouth to lung (MTL) this atomizer is as versatile as it gets. The SQuape A [rise] offers the following advantages: intelligent current conduction, non-conductive surface structure of the complete atomization chamber (made of enamelled aluminium), closing of the 4ml tank by a simple rotation. The tank can be carried separately from the base, even when full. Before the first use, it is necessary to insert the supplied closing ring. We recommendusing the SQuape A[rise] in a resistance range of 0.3 to 2 ohms and a power range of 7 to 55 watts. Please note that too much power may cause the atomizer body to heat up. This is only a recommendation.
-
23.90 CHFThe long awaited Nautilus GT Mini is finally here ! A new collaboration of Aspire This time with the German high-end manufacturer Taifun, the creator of the Taifun GT ! The Nautilus GT Mini Clearomizer takes the design as well as the incredible conception of Taifun. This atomizer is 22mm in diameter for a capacity of 2.8ml. The Nautilus GT Mini is intended for the vapoteur who wants an indirect MTL vape with flavors then. The Nautilus GT Mini is compatible with all Nautilus BVC Resistors.
-
9.50 CHFIN A PACK OF 2 UNITS Voopoo offers replacement cartridges for Drag S and Drag X as well as for PnP atom izers. These cartridges with a capacity of 4.5ml will be very practical if you want to vary the pleasures by having several flavors at your disposal or if you must, in case of wear, simply replace your atomizer. These cartridges are also compatible with all Voopoo PnP Resistors. Enjoy generous capacity, robust design, easy refilling and compatibility with all Voopoo PnP Resistors ! Remember to change your resistor regularly. It will depend on how often you use it, but about every fortnight you should change it or when you smell a burnt taste.
-
18.00 CHFHere is the DTL Kit imagined by BP Mods and manufactured by Dovpo. This kit will allow you to change the draw of your Pioneer RTA atomizer in a radical way. Machined with great care, the DTL Kit BP Mods will allow you to switch from a MTL vape to a DL vape. This kit comes with a brand new atomizer chamber, an ultem drip-tip and two airflow pins that allow a large amount of air to pass through, this DTL Kit from BP Mods allows the Pioneer RTA to compete with direct inhalation atomizers. Even with a much more airy draw the flavors are there !
-
-30% 24.90 CHF 17.43 CHFHere is a versatile atomizer the Nautilus XS from Aspire. The Nautilus XS is an atomizer of 22 mm in diameter and a capacity of 2ml, which has a top filling by simply unscrewing the top-cap. Definitely no fear of leakage to have, thanks to its airflow located on the top of the tank, the Nautilus XS guarantees a comfort of unequalled vape ! Everything is possible with this atomizer that is a tight or rather air vape, you decide by simply adjusting its adjustable airflow ! Several resistors are compatible with the Aspire Nautilus XS, the Nautilus X resistors and PockeX resistors. With the atomizer is also provided the new Nautilus XS Mesh resistance of 0.7 Ohm the latter is a good compromise between a large volume of steam and a powerful restitution of flavors, you will not believe your taste buds ! The Nautilus XS from Aspire is a new versatile version full of promise and innovation.
-
18.50 CHFHere is the Aegis Boost RBA 2ml cartridge Geek Vape ! Turn the Aegis Boost kit into a rebuildable with the Aegis Boost RBA Cartridge.The Aegis Boost RBA cartridge is equipped with a single coil plate and has a capacity of 2ml.The kit includes 4 coils: 2 in KA1 of 1.3 Ohm2 in N8 Fused Clapton of 0.6 Ohm2 cotton laces
Showing 65-96 of 105 item(s)