AS Chip 4.0

Aesthetically, the Aegis Legend 3 kit is built with a zinc alloy shell with silicone parts, offering both style and comfort.

The Aegis Legend 3 kit runs on two 18650 batteries (not supplied), is powered by the AS Chip 4.0, which provides 200 Watts of power and features fast charging via USB-C, supporting a charging current of 3A.

The use of an external charger is recommended to extend the life of your batteries.

Water, shock and dust resistant thanks to IP68 certification, the Aegis Legend 3 kit is ideal for all situations.

The Legend 3 box is equipped with the revolutionary high-tech Touch Lock system, which automatically unlocks the box when you hold it in your hand and locks it once you put it down.

Geekvape also offers other locking modes:

Button lock: this mode disables Touch Lock and locks only the adjustment buttons, leaving the fire button active.

Unlock mode: no locking.

Dimensions: 140 mm x 55.36 mm x 26 mm

Modes and screen

Its 0.96 inch TFT screen offers clear navigation and display customisation options.

Several vaping modes are available:

Smart mode: the box recognises the resistor in use and adapts its power automatically.

VW mode: manual power adjustment from 5 to 200 Watts.

Eco Mode: helps extend the autonomy of the Legend 3 box while maintaining satisfactory vaping.

Boosting mode: sends power directly for a more intense puff.

Memory mode: up to five different settings can be saved.

TCR mode: (for rebuildable atomizers) to prevent overheating and extend the life of the resistors, this mode limits the heating temperature depending on the resistive wire used (Ni, Ti and SS).

Z Fli Clearomizer

The Aegis Legend 3 kit comes with the Z Fli Clearomizer.

The Z Fli has a 5.5 ml bubble tank, a 24 mm diameter base, a top-fill system and an adjustable airflow also located on the top of the clearomizer.

The Z Fli clearomizer is compatible with Z Series Resistors:

0.15 Ohm Z Series resistors for a very airy DL draw for use between 80 and 90 Watts, ideal ratio 50PG/50VG to 10PG/90VG

0.2 Ohm Z Series resistors for an air draft DL for use between 70 and 80 Watts, ideal ratio 50PG/50VG to 20PG/80VG

0.25 Ohm Z Series resistors (dual coil) for DL air draw for use between 45 and 57 Watts, ideal ratio 50PG/50VG to 20PG/80VG

0.4 Ohm Z Series resistors for DL air draw for use between 50 and 60 Watts, ideal ratio 50PG/50VG to 20PG/80VG

Also compatible with the new Z Series XM resistors (longer life and intense flavours)

0.15 Ohm Z Series XM resistors for a very airy DL draw for use between 70 and 85 Watts, ideal ratio 50PG/50VG to 10PG/90VG

0.4 Ohm Z Series XM resistors for an airy DL draw for use between 50 and 60 Watts, ideal ratio 50PG/50VG to 20PG/80VG